SMT Inductors, SIMID Series B82422H SIMID 1210H Size 1210 (EIA) or 3225 (IEC) Rated inductance 1 to 680 H Rated current 61 to 1150 mA Construction Ferrite drum core Laserwelded winding Flameretardant encapsulation Features Very high current handling capability Suitable for reflow soldering acc. JEDEC JSTD 020C leadfree, RoHScompatible qualified acc. AECQ200 Applications Filtering of supply voltages, coupling, decoupling DC/DC converters / switch mode power supplies Automotive electronics Telecommunications Terminals Electroplated Base material CuSn6 0,4 m Cu 12 m Ag 57 m Sn (lead-free) Marking Marking on component: L value (in H) and tolerance of L value (coded) Date of manufacture (coded) Delivery mode 8mm blister tape, reel packing 180mm reel (2000 pcs) or 330mm reel (7500 pcs) Taping in accordance to IEC 602863. For details on taping and packing refer to data book Chokes and Inductors and to Epcos Homepage. Please read the important notes Hugo ist doof BNR B82422H1*37659 at the end of this document 1 28.06.2006SMT Inductors, SIMID Series B82422H SIMID 1210H Dimensional drawing Layout recommendation Dimensions (mm) A B C D Reflow soldering 2,70 1,15 1,80 4,40 Marking 1) Soldering area, tinned Technical data and measuring conditions Electrical specifications at T = 20C A Rated inductance L Measured with impedance analyzer HP 4294A R at frequency f L Q factor Q Measured with impedance analyzer HP 4294A min at frequency f Q Rated current I Maximum permissible DC with inductance decrease R L/L 10% and temperature increase of 45K at 0 rated temperature of 105C Selfresonance frequency f Measured with network analyzer HP 8753 res,min DC resistance R measuring current < I max R Climatic category 55/150/56 to IEC 600681 Solderability lead-free to IEC 60068258 and Jedec JSTD 002B / JESD22B102D Resistance to soldering heat to IEC 60068220 and MILSTD202, method 210 Permissible PCB bending 2mm (100mm long standard PCB) Weight Approx. 50mg Please read the important notes Hugo ist doof BNR B82422H1*37659 at the end of this document 2 28.06.2006