NV175 Series 175-200W, 3 x 5 Power Supplies Features 1-5 Outputs Up to 90% Ef cient Active Power Factor Correction Universal Input (90 - 264VAC) No Minimum Loads Medical Approvals (Basic Insulation Input-Output) Key Market Segments & Applications Speci cations Model NV175 Input Voltage range - 90 - 264VAC (47 - 63Hz, 440Hz with reduced PFC) Inrush Current A <40A at 25C and 264VAC input, Cold Start Power Factor Harmonics - EN61000-3-2 Compliant (0.97 typical) Regulation Total - 1% Including Line (for 90-264VAC input change), Load (for 0-100% load change) and Cross (for 0-100% load change on any other output) regulation Ripple & Noise mV 1% or 50mV (Which ever is greater) Ef ciency - Up to 90%, con guration dependant Minimum Load A None Overcurrent Protection - >105% Overvoltage Protection V CH1 & CH2, 120-130%, Cycle AC line to reset Overtemperature Protection - Yes Hold Up Time (Typ) ms >16ms at 90VAC Input Leakage Current (max) A 123 A 120VAC 60Hz, 257 A 240VAC 60Hz, <300 A 264VAC 63Hz (Type Test results) Remote Sense - On Outputs CH1 & CH2, 0.5V compensation maximum DC Good - CH1 Only, High on Fail (90% of nominal 5%) Remote On/Off (Specify N option) - -N1 or -N2 option: TTL level high = Off, -N3 or -N4 option: open circuit = Off (except standby) Operating Temperature (1)(7) - 0 to +70C. Derate linearily to 50% load from 50C to 70C Storage Temperature - -40 to +85C Humidity (non condensing) - 5 - 95% RH Cooling - Forced air, 2m/s from input to output (Approx 10 CFM) Isolation (4) - Input to Ground 2.3kVDC, Input to Output 4.3kVDC, Output to Ground 200VDC Vibration (non operating) - Conforms to MIL-STD-810E, Method 516.5, Pro I, IV, VI EN60068-2-6, IEC68-2-6 Shock - Conforms to MIL-STD-810E/F, Method 514.4, Pro I, Cat 1,9 EN60068-2-27, EN60068-2-47, IEC68-2-47, IEC68-2-47, JIS C0041-1987 Safety Agency Approvals - UL/CSA/IEC/EN 60950-1, UL/CSA/IEC/EN 60601-1, ANSI/AAMI ES60601-1, IEC/EN 61010-1, CE Mark Immunity - EN61000-6-2:2001, EN61000-4-2, -3, -4, -5, -6, -8, -11 Conducted Emissions and Flicker - EN55022 Class B (per CISPR.22), EN61000-3-3 Radiated Emissions (2) - EN55022 Class A (per CISPR.22) Weight (Typ) g 250g Size (without cover) (3) in 3 x 5 x 1.25 N option version 3.7 x 5 x 1.25 Warranty yrs Three Years (1) -20C cold start (2) See application note for Class B (3) Including underside component leads (4) Input-Output: Reinforced IEC60950-1, Basic IEC 60601-1. See NV175-M for reinforced medical insulation 1-800-526-2324 www.us.tdk-lambda.com/lp/ 91 Disclaimer: us.tdk-lambda.com/lp/legal.htmNV175 Series Stocked Models Quick Selector Outline Drawing CH5 Global CH1 CH2 CH3 CH4 Stand By Option Model (5) (5) (6) Type NV1-1T000 12V/15A - - - - - NV1-1G000 24V/7.5A - - - - - NV1-453TT +5V/25A +3.3V/15A +12V/5A -12V/1A - - NV1-453FF +5V/25A +3.3V/15A +15V/5A -15V/1A - - NV1-4G5TT +24V/7.5A +5V/8A +12V/5A -12V/1A - - NV1-4G5FF +24V/7.5A +5V/8A +15V/5A -15V/1A - - NV1-453TT-N3 +5V/25A +3.3V/15A +12V/5A -12V/1A 5V/2A N3 (ATX) NV1-453FF-N3 +5V/25A +3.3V/15A +15V/5A -15V/1A 5V/2A N3 (ATX) NV1-4G5TT-N3 +24V/7.5A +5V/8A +12V/5A -12V/1A 5V/2A N3 (ATX) NV1-4G5FF-N3 +24V/7.5A +5V/8A +15V/5A -15V/1A 5V/2A N3 (ATX) Notes: (5) Maximum combined current from CH1 + CH2 = 25A 5V CH1 models are limited to 175W max. All others 180W, 200Wpk 5 mins (6) CH5 is always on regardless of inhbit status. Peak rated at 2.5A, oating output (7) Convection cooled maximum ratings: CH1: 55W, Ch2: 8.25W, Ch3: 9W, CH4: 3W, 75.25W total. 0C - 40C temperature range (8) 12 - 12.5V if 24V CH3 is tted. (9) 14.5 - 15.5V if 24V CH3 is tted. (10) 24 - 24.5V if 5V CH2 is tted. See the website for detailed datasheet and outline drawing. 24 - 26V if 24V CH3 is tted Built to Order Model Selector CH1 CH1(5) Adjust. CH2 Adjust. CH3 Adjust. CH4 Adjust. Code Range CH2(5) Code Range CH3 Code Range CH4 Code Range +5V / 25A 5 5 - 5.5V +1.8V / 15A 1 0.9 - 3.3V -12V / 1A T Fixed +2.7V / 15A 2 2.5 - 3.3V -15V / 1A F Fixed +3.3V / 15A 3 2.5 - 3.3V -3.3V / 2A 3H Fixed No output 0 - -5V / 2A 5H Fixed +12V / 5A T 12 - 15V -12V / 2A TH Fixed +15V / 5A F 12 - 15V -15V / 2A FH Fixed +24V / 2.5A G 18 - 24V Fan Supply only 0H Fixed +12V / 15A T 12 - 15V (8) +5V / 10A 5 3.3 - 5.5V No output 0 - No output 0 +15V / 12A F 12 - 15V (9) No output 0 - Add Y to code Add P to for negative Add P to code code for polarity output +24V / 7.5A G 24 - 28V (10) +5V / 8A 5 3.3 - 5.5V for positive positive No output 0 - polarity output polarity output How to Create a Model Number NV1- Enter number of outputs CH1 CH2 CH3 CH4 Global Case Code Code Code Code Option Option No Option Blank Blank No Case AC Fail, Remote On/Off, 5V/2A Standby, CH1 DC Good N U U Chassis AC Fail, Remote On/Off, 12V/1A Standby, CH1 DC Good N1 C U Chassis with Cover AC Fail, Remote On/Off, 13.5V/1A Standby, CH1 DC Good N2 F U Chassis, Cover and Fan* ATX AC Fail+Remote On/Off, 5V/2A Standby, CH1 DC Good N3 I U Chassis, Cover and Fan* ATX AC Fail+Remote On/Off, 12V/1A Standby, CH1 DC Good N4 and IEC inlet * A high output CH4 (3H, 5H, TH, FH) or fan supply 0H must be selected to provide fan option. Example NV1 3 G 5 0 3HP N C Description: Triple output, 24V/7.5A, 5V/8A, 3.3V/2A, Global option N, U Chassis with cover. Mating Parts (Molex) Other Industrial Products CONN Housing Pins NV 300 to 700W Medical, 1-6 outputs J1 39-01-2245 44476-3112 SC40/60 40 to 80W single, dual & triple 3x5 footprint J2 09-50-8051 08-52-0113 ZWS/ZWSPAF 5 to 240W single output power supplies For Additional Information, please visit us.tdk-lambda.com/lp/products/nv-series.htm 1-800-526-2324 www.us.tdk-lambda.com/lp/ 92 Revision D1: Apr 2015