PFE-SA, PFE500-F & PFE1000-FA 300-1008W AC-DC Power Module Features Low pro le, small size 100C baseplate temperature High power density High E ciency Suitable for conduction cooling Power Factor Corrected (PFC) Key Market Segments & Applications Speci cations PFE300SA Model PFE500SA PFE700SA PFE500F PFE1000FA AC Input VAC 85 to 265VAC, 47-63Hz (up to 440Hz) (4) Input Current (115 / 230VAC) 3.2 / 1.6 6.8 / 3.4 Model dependant A 5.2 / 2.5 7.0 / 3.4 100/200VAC 10.8 / 5.3 Inrush Current (115 / 230VAC) (1) A 23 / 46A peak Power Factor - 0.95 minimum, meets EN61000-3-2 Output Voltage Setpoint Accuracy - 2% 1V 2% 2% Ripple and Noise (1) - 1% 4V 1% 1% Over Current Protection % 105 - 140% (Automatic Recovery) 105 - 140% Manual reset Over Voltage Protection - 125 - 145% 60 - 69.6V 125 - 145% 125 - 145% Series Operation - Yes Parallel Operation - No Yes (Droop mode) Yes (Single wire) Yes (Single wire) Power On Signal (ENA) - Open collector (10mA sink current). Low (on) when output is present Auxiliary Supply - None None 10 - 14V, 20mA 10 - 14V, 20mA Remote On/O (Opto isolated) - None None High = On High = On Overtemperature Protection - Yes Operating Baseplate Temp. C -40 to +100C (2) Storage Temperature C -40 to +100C Humidity (non condensing) - Operating: 20 - 95%RH, Non Operating: 10 - 95%RH Cooling - Conduction Withstand Voltage (1 min) (3) - Input to Output 3kVAC, Input to Baseplate 2.5kVAC, Output to Baseplate 1.5kVDC Isolation Resistance - Output to baseplate: 100M Ohm at 500VDC, 25C ambient, 70%RH 2 Vibration (non operating) - 10-55Hz (1 min sweep), constant amplitude 0.825mm (max 49m/s ), X, Y, Z 1 hour each 2 Shock - 196.1m/s Safety Certi cations - UL60950-1, CSA60950-1 (cUL), EN60950-1, CE mark (LVD) Weight g 200 300 420 Size (WxHxL) mm 61 x 12.7 x 116.8mm 70 x 12.7 x 122mm 100 x 13.4 x 160mm in 2.4 x 0.5 x 4.6 2.76 x 0.5 x 4.8 3.94 x 0.53 x 6.3 Warranty yrs 5 years 2 years 5 years Notes: (Consult Installation Manual for detailed speci cations, test methods and application notes) 1) External components are required, consult Application Notes 2) PFE500SA-12, PFE500F-12: -40 to 85C. See instruction manuals for derating curves PFE1000FA, PFE1000F48 & PFE1000FA48: -40 to 85C below 170VAC input voltage. See instruction manuals for derating curves 3) PFE500F, PFE1000FA: 500VDC Output to baseplate 4) Reduced PFC above 63Hz. Contact technical support for 440Hz operation.PFE-SA, PFE500-F & PFE1000-FA Speci cations Output Adjust. Maximum Maximum Load Line E ciency Model Voltage (V) Range (V) Current (A) Wattage (W) Reg. (mV) Reg. (mV) typ (5) PFE300SA-12 12 9.6 - 14.4 25 300 48 48 84 / 86 PFE500SA-12 12 9.6 - 14.4 33 396 48 48 84 / 86 PFE500F-12 12 9.6 - 14.4 42 504 48 48 81 / 83 PFE1000FA-12 12 9.6 - 14.4 60 720 48 48 84.5 / 87 PFE300SA-28 28 22.4 - 33.6 10.8 302 56 56 87.5 / 89.5 PFE500SA-28 28 22.4 - 33.6 18 504 56 56 88 / 90 PFE500F-28 28 22.4 - 33.6 18 504 56 56 84 / 86 PFE1000FA-28 28 22.4 - 33.6 36 1008 56 56 87 / 89.5 PFE300SA-48 48 38.4 - 57.6 6.3 302 96 96 88 / 90.5 PFE500SA-48 48 38.4 - 57.6 10.5 504 96 96 90 / 91 PFE500F-48 48 38.4 - 57.6 10.5 504 96 96 84 / 86 PFE1000FA-48 48 38.4 - 57.6 21 1008 96 96 88 / 90.5 PFE700SA-48 51 None 14 714 50 - 57V (6) 90 / 92 (5) 115 / 230VAC (100/230VAC for PFE500F) (6) Total regulation range PFE500SA Outline Drawing PFE500F Outline Drawing PFE500SA Basic connection Heatsink Table Heatsink Size (mm) PFE Module HAF-10L 116.8 x 25.4 x 61 PFE300/500SA HAF-15L 116.8 x 38.1 x 61 PFE300/500SA HAF-15T 116.8 x 38.1 x 61 PFE300/500SA HAL-F12T 122 x 35 x 69.9 PFE500F HAM-F10T 160 x 33.4 x 100 PFE1000FA Options Su x Description Blank M3 tapped mounting inserts (4) /T 3.3mm non-threaded inserts (4) For Additional Information, please visit