Rev. A (04/18) Page 1 of 2 G3 Flux Remover Product 1631 Product Description G3 has a powerful spray and strong solvent that blasts off residues and cleans areas under components that a brush cannot touch. Formulated to be powerful and nonflammable, yet economical. Eliminates brushing and scrubbing, saving time and materials. Features / Benefits Powerful cleaner Nonflammable Rapid evaporation Zero residue Proven effective for lead-free processes Non-ozone depleting Applications Typical Product Data and Physical Properties Removal of flux during post soldering Physical state: Liquid Cleaning of printed circuit boards, component leads, and surface Flash point: Product does not sustain mount devices/pads combustion Screens and stencils Flammable limits: Lower 4.6% Upper 12.8% Usage Instruction Color: Clear, colorless For standard aerosol use. This container is compatible with brush Odor: Ethereal system (MCC-ESD). Insert trigger grip hose and locking clip as Boiling/condensation point 102.2F (39C) specified in instructions with original brush system. Direct spray to Relative density: 1.22 saturate soiled surface. To clean in hard to reach areas, insert Vapor pressure: 19.3 kPa (144.85 mmHg) extension tube in spray head to direct spray. Volatility: 100% (w/w) Heat of combustion: 0.84 kJ/g Products with Brush Attachment (1631-5S, 1631-16SB): Ignition distance: 0 cm Hold can 6-8 inches away. Direct spray to saturate soiled surface. VOC: 64% by weight (EPA) When used as a general cleaner, start at top of area to be cleaned 75% weight (CARB) using a sweeping motion, and spray the area slowly, working towards Shelf life: 5 years the bottom. To clean in hard to reach areas, insert extension tube in spray head to direct spray. Allow components to dry completely before applying current. Allow liquid to dry before supplying power. This product is not recommended for acrylic, polystyrene, or polycarbonate materials (materials used in such items as television cabinets. 800-858-4043 www.techspray.com Rev. A (04/18) Page 2 of 2 G3 Flux Remover Environmental Policy Product 1631 Techspray is committed to developing products to ensure a safer and cleaner environment. We will continue to meet and sustain the Material Compatibility regulations of all federal, state and local government agencies. ABS: Not Compatible Nylon: Excellent Resources Lexan: Not Compatible Techspray products are supported by global sales, technical and HDPE: Excellent customer services resources. LDPE: Excellent For additional technical information on this product or other C.E.Phenolic Excellent Techspray products in the United States, call the technical sales PMMA: Not Compatible department at 800-858-4043, email tsales techspray.com or visit POM Excellent our web site at: www.techspray.com. PP Excellent PS: Not Compatible Important Notice to Purchaser/User: The information in this PTFE: Excellent publication is based on tests that we believe are reliable. The results PVC: Excellent may vary due to differences in tests type and conditions. We recommend that each user evaluate the product to determine its Packaging and Availability suitability for the intended application. Conditions of use are outside our control and vary widely. Techsprays only obligation and your 1631-5S 5 oz (142g) Aerosol Can w/ brush only solution is replacement of product that is shown to be defective 1631-16S 16 oz (454g) Aerosol Can when you receive it. In no case will Techspray be liable for any 1631-16SB 16 oz (454g) Aerosol Can w/ brush special, incidental, or consequential damages based on breach of 1638-G 1 gallon (3.8L) warranty, negligence or any other theory. 1638-5G 5 gallon (19L) Europe North America Countries outside the US ITW Contamination Control BV Call to locate a distributor in your Techspray Saffierlaan 5, 2132 VZ Hoofddorp country 8125 Cobb Center Drive The Netherlands Kennesaw, GA 30152 +31 88 1307 400 800-858-4043 info itw-cc.com tsales techspray.com