SAFETY DATA SHEET Techspray No-Clean Desoldering Flux coated braid NA Section 1. Identification GHS product identifier : Techspray No-Clean Desoldering Flux coated braid NA Other means of : Sizes: 0.9mm/1.4mm/1.9mm/2.5mm/3.3mm/4.9mm/0.9mm/1.4mm/1.9mm/2.5mm/3. identification 3mm/4.9mm/0.63mm/4.9mm No Clean flux is a synthetic (non-colophony)flux. Per J-STD-004 Section 3.2, it is classified as REL0. Per British Std. EN 29454-1:1993 and ISO9454-1:1990, the No Clean flux has a classification of 1.2.3.B. Product type : Solid. Relevant identified uses of the substance or mixture and uses advised against Not applicable. Supplier s details : Manufacturer: Techspray 8125 Cobb Center Drive Kennesaw, GA 30152 Tel: 800-858-4043 1 703-527-3887 Emergency telephone : Chemtrec - 1-800-858-4043 CANTUC (Canadian Transportation): (613) 996-6666 number (with hours of Emergency phone: (800) 858-4043 operation) 24/7 Section 2. Hazards identification OSHA/HCS status : While this material is not considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200), this SDS contains valuable information critical to the safe handling and proper use of the product. This SDS should be retained and available for employees and other users of this product. Classification of the : Not classified. substance or mixture Percentage of the mixture consisting of ingredient(s) of unknown toxicity: 100% GHS label elements Signal word : No signal word. Hazard statements : No known significant effects or critical hazards. Precautionary statements Prevention : Not applicable. Response : Not applicable. Storage : Not applicable. Disposal : Not applicable. Hazards not otherwise : Exposure to soldering fumes when the product used in the desoldering process classified Date of issue/Date of revision : 5/10/2015. Date of previous issue : No previous validation. Version : 1 1/11Techspray No-Clean Desoldering Flux coated braid NA Section 3. Composition/information on ingredients Substance/mixture : Mixture Other means of : Sizes: 0.9mm/1.4mm/1.9mm/2.5mm/3.3mm/4.9mm/0.9mm/1.4mm/1.9mm/2.5mm/3. identification 3mm/4.9mm/0.63mm/4.9mm No Clean flux is a synthetic (non-colophony)flux. Per J-STD-004 Section 3.2, it is classified as REL0. Per British Std. EN 29454-1:1993 and ISO9454-1:1990, the No Clean flux has a classification of 1.2.3.B. CAS number/other identifiers CAS number : Not applicable. Product code : 1814/1815/1816/1817/1818/1819/1820/1821/1822/1823/1824/1825 Ingredient name % CAS number pentaerythritol tetrabenzoate 0.5 - 2 4196-86-5 Any concentration shown as a range is to protect confidentiality or is due to batch variation. There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this section. Occupational exposure limits, if available, are listed in Section 8. Section 4. First aid measures Description of necessary first aid measures Eye contact : Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Get medical attention if irritation occurs. Inhalation : Remove victim to fresh air and keep at rest in a position comfortable for breathing. Get medical attention if symptoms occur. Skin contact : Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Get medical attention if symptoms occur. Ingestion : Wash out mouth with water. Remove victim to fresh air and keep at rest in a position comfortable for breathing. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Do not induce vomiting unless directed to do so by medical personnel. Get medical attention if symptoms occur. Most important symptoms/effects, acute and delayed Potential acute health effects Eye contact : May cause eye irritation. Inhalation : soldering fumes Skin contact : May cause skin irritation. Ingestion : Harmful if swallowed. Over-exposure signs/symptoms Eye contact : Adverse symptoms may include the following: irritation redness watering Inhalation : Adverse symptoms may include the following: respiratory tract irritation Skin contact : Adverse symptoms may include the following: irritation redness Ingestion : Adverse symptoms may include the following: Ingestion Indication of immediate medical attention and special treatment needed, if necessary Date of issue/Date of revision : 5/10/2015. Date of previous issue : No previous validation. Version : 1 2/11