133611 TE Connectivity

RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) RECOMMENDED PANEL CUTOUT EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTUECKUNGSSEITE) EMPFOHLENER FRONTPLATTEN-AUSSCHNITT TOL. 0.05 0.002 UNLESS NOTED 16,66 0,656 7 x 1,27 = (8,89 0,350 ) TOP OF PCB 0,76 0,030 LP 1,27 0,050 1 8 15,74 0,620 18,67 0,735 3,12 0,123 1 8 11,43 0,450 16,35 0,644 +0,30 +0,012 11,43 0,13 0,450 0,005 2,50 0,00 0,098 0,000 18,50 0,25 0,728 0,010 8,13 0,320 NOTE 1: WITH PEGS, SMT SIDE SHIELD TABS AND SMT TERMINALS (STP) NOTE 2: C - UL APPROVED E145613 AND MEETS FCC REQUIREMENTS IMPROVED CONTACT DESIGN NOTE 3: RoHS COMPLIANT (PRE BEND) PART NO. PACKAGING IDENT. NR. VERPACKUNG TRAY (Standard) (SEE PAGE 2 of 2) 133611 Technical specifications Materials & Finish Standard applic. Value Test Data Standard applic. Value TAPE & REEL (SEE PAGE 2 of 2) Insulation body Standard description PA46 30% Mechanical properties 203422 120 PIECES PER REEL Contact material Standard description CuSn5 (acc.JIS) Insertion/withdrawIEC 603-7 max. 20 N Contact finish, mating zone Thickness of plating 30 in Au over 50 in Ni Mechanical operatiIEC 512-5, 9a min. 1000 Information: Tolerances Scale 2:1 Contact finish termination zone Thickness of plating 80 in matte Sn over 50 in Ni Effectiveness of connector coupling device IEC 512-8, 15f 50 N Shell/shield material Standard description C2680 (acc. JIS) All Dimensions Plating shield / shielding pin 50 in Ni / 80 in Sn Electrical properties in mm Creepage / clearance distances Designation Assembly process a) Contact - contac IEC 807-3 0,52 mm All rights reserved. Packaging see chart b) Contact - shell IEC 807-3 min. 1,0 mm Subject to modification without Only for Information. MOD JACK - MJLS Solder temperature 260C at 3-5s Voltage proof (Dielectric Withstand Voltage) prior notice. To ensure that this is the latest Suitable assembly process reflow a) Contact - contac IEC 512-2, 4a min. 1.000 V AC/DC Drawing will not be updated. version of this drawing, please b) Contact - shell/teIEC 512-2, 4a min. 1.500 V AC/DC 8P8C, 1X1, SMT contact one of the ERNI companies Approvals Current carrying caIEC 512-3, 5b 1,5 A 25 C before using. UL insulation body UL 94 V0 Contact resistance IEC 512-2, 2a max. 30 mOhm I (1/2) UL File No. E145613 Insulation resistancIEC 512-2, 3a min. 500 MOhm www.ERNI.com 203499 RoHS compliant Yes Environmental properties b 20.08.2015 A3 Operation temperature -40 C - + 85C Index Date MJ Class 0,10 0,004 MAX 2,50 0,098 11,75 0,463 Copyright by ERNI Production GmbH & Co. KG Proprietary notice pursuant to ISO 16016 to be observed. 12,29 0,484 11,47 0,452 3,05 0,120 2,54 0,100 3,18 0,125 3,30 0,07 0,130 0,003 X2Detail Section B-B TAPE AND REEL INFORMATION VERPACKT IN GURTVERPACKUNG 53,00 120 CONNECTORS PER REEL Section A-A 0,40 0,016 0,05 111 111 2,00 0,079 4,00 0,157 A 14,00 329,00 BB 203422 TAPE & REEL PACKAGE NOTE 1: 10 SPROCKET HOLE PITCH CUMULATIVE TOLERANCE 0.2 NOTE 2: CAMBER NOT TO EXCEED 1 mm IN 100 mm A 5,00 0,197 28,00 1,102 NOTE 3: MATERIAL: CLEAR ADVANTEK POLYSTYRENE 12,40 0,488 12,40 0,488 NOTE 4: MEASURED FROM A PLANE ON THE INSIDE BOTTOM OF THE POCKET TO THE TOP SURFACE OF THE CARRIER 16,10 0,634 NOTE 5: POCKET POSITION RELATIVE TO SPROCKET HOLE MEASURED AS TRUE POSITION OF POCKET, NOT POCKET HOLE 15,90 0,626 1,35 0,053 1,35 0,053 1:1 Information: Tolerances Scale 2:1 All Dimensions in mm Designation All rights reserved. Subject to modification without Only for Information. MOD JACK - MJLS prior notice. To ensure that this is the latest Drawing will not be updated. version of this drawing, please 8P8C, 1X1, SMT contact one of the ERNI companies before using. I (2/2) 133611 TRAY PACKAGE www.ERNI.com 203499 b 20.08.2015 A3 Index Date MJ Class R0,75 +0,1 +0,1 1,50 0,059 0,20 0,008 0,05 1,75 0,069 20,20 0,795 0,15 44,00 1,732 0,3 Copyright by ERNI Production GmbH & Co. KG Proprietary notice pursuant to ISO 16016 to be observed.