154N-300A-R

154N Constant Voltage SPECIFICATIONS 316L SS Pressure Sensor 19mm Diameter Package 0 - 100mV Output Absolute and Gage Temperature Compensated The 154N constant voltage is a 19 mm small profile, media compatible, piezoresistive silicon pressure sensor FEATURES packaged in a 316L stainless steel housing. The 154N constant voltage is designed for O-ring mounting and OEM applications O-Ring Mount where compatibility with corrosive media is required. -40C to +125C Operating The sensing package utilizes silicone oil to transfer Temperature Range pressure from the 316L stainless steel diaphragm to the sensing Up to 0.1% Pressure Non-Linearity element. A ceramic substrate is attached to the package that Solid State Reliability contains laser-trimmed resistors for temperature compensation and offset correction. APPLICATIONS Please refer to the 154N uncompensated and compensated datasheets for more information on different Medical Instruments features of the 154N. Process Control Fresh & Waste Water Measurements Refrigeration/Compressors STANDARD RANGES Pressure Transmitters Range psia psig Hydraulic Controls 0 to 1 0 to 5 0 to 15 0 to 30 0 to 50 0 to 100 0 to 300 0 to 500 SENSOR SOLUTIONS ///154N 04/2018 Page 1 15 4N Constant Voltage PERFORMANCE SPECIFICATIONS Unless otherwise specified:Supply Voltage: 10V , Ambient Temperature: 25C DC 005P SI 015P SI PARAMETERS UNITS NOTES MIN TYP MAX MIN TYP MAX Span 1psi: 77, 80, 83 99 100 101 mV 5psi: 98, 100, 102 Zero Pressure Output -2.0 0 2.0 -1.0 0 1.0 mV 1 1psi: -0.30 to 0.30 Pressure Non Linearity -0.10 0.10 %Span 2 5psi: -0.20 to 0.20 Pressure Hysteresis -0.10 0.02 0.10 -0.05 0.02 0.05 %Span Repeatability 0.02 0.02 %Span Input Resistance 5.5 9.0 12.5 5.5 9.0 12.5 K Output Resistance 4.0 7.0 4.0 6.0 K Temperature Error Span -1.0 1.0 -1.0 1.0 %Span 3 Temperature Error Offset -1.0 1.0 -1.0 1.0 %Span 3 Thermal Hysteresis Span -0.25 0.05 0.25 -0.25 0.05 0.25 %Span 3 Thermal Hysteresis Offset -0.25 0.05 0.25 -0.25 0.05 0.25 %Span 3 Long Term Stability Span 0.10 0.10 %Span/Year Long Term Stability Offset 0.25 0.10 %Span/Year Supply Voltage 10 14 10 14 V 4 Output Load Resistance 5 5 M 5 Insulation Resistance (50Vdc) 50 50 M 6 Output Noise (10Hz to 1KHz) 1.0 1.0 V p-p Response Time (10% to 90%) 0.1 0.1 ms 1psi: 10X max Pressure Overload 3X Rated 5psi: 3X max 1psi: 12X max Pressure Burst 4X Rated 7 5psi: 4X max Compensated Temperature 1psi: 0 to 50 -20 +85 C 5psi: 0 to 70 Operating Temperature -20 +70 -40 +125 C 8 Storage Temperature -40 +125 -40 +125 C 8 Media Pressure Port Liquids and Gases compatible with 316/316L Stainless Steel Media Reference Port Compatible with Silicon, Pyrex, Gold, Fluorosilicone Rubber, and 316/316L Stainless Steel Notes 1. Measured at vacuum for absolute (A), ambient for gage (G). 2. Best fit straight line. 3. Over the compensated temperature range with respect to 25C. 4. Guarantees output/input ratiometricity. 5. Load resistance to reduce measurement errors due to output loading. 6. Between case and sensing element. 7. The maximum pressure that can be applied to a transducer without rupture of either the sensing element or transducer. 8. Maximum temperature range for product with standard cable and connector is -20C to +105C. 9. Standard gage units are not recommended for vacuum applications. For vacuum applications below 1/2 atmosphere, consult factory. 10. Device Marking: Each part shall be identified with Model Number, Pressure Range, Type, Lot Number, Serial Number, and Date Code. 11. Shipping/Packaging Requirements: The Stainless Steel diaphragm is protected by a plastic cap. Each unit will be packaged individually in a plastic vial with anti-static foam. SENSOR SOLUTIONS ///154N 04/2018 Page 2