RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN AUSSCHNITT 16,67 0,656 PCB EDGE LP 15,88 0,63 L.E.D. 1 L.E.D. 2 1 8 3,20 0,126 11,43 0,45 10,89 0,43 NOTE 1: SIDE SHIELD TABS IN REAR 3.05mm (R) NOTE 2: PANEL GROUND FLANGES BOTH SIDES AND TOP (GF5) LED 1 RIGHT LED 2 LEFT LED NO. LED 1 RECHTS LED 2 LINKS CODE IDENT. NR. 203510 GREEN YELLOW L2 MATERIALS AND FINISH HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK SHIELDING: Cu ALLOY, PLATED WITH 40in Ni CONTACTS: PHOSPHOR BRONZE CONTACT FINISH: Au, 0.8 m (30 in) OVER Ni Information: Tolerances Scale 2:1 TERMINAL FINISH: Sn MATTE over Ni All Dimensions +/- 0,2mm, LED LENS: EPOXY in mm DURABILITY: 1000 MATING CYCLES Designation All rights reserved. OPERATING TEMPERATURE: -40 to +85C Only for Information. Subject to modification without MOD Jack - MJIM To ensure that this is the latest prior notice. version of this drawing, please Drawing will not be updated. 8C10T.1x1. INTEGRATED MAGNETICS contact one of the ERNI companies before using. I (1/2) www.ERNI.com 203511 a 04.09.2012 A3 Index Date Class MJIM Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. 21,59 0,850 MAX 3,05 0,50 0,12 0,02 0,38 0,10 0,01 0,00 14,72 0,58 13,63 0,54 ELECTRICAL SCHEMATIC H5I05 ELEKTRISCHER SCHALTPLAN PCB CABLE 1:1 TD0+ P2 J1 MX0+ TD0- P3 J2 MX0- 1:1 TD1+ P4 J3 MX1+ TD1- P5 J6 MX1- 1:1 J4 MX2+ TD2+ P6 TD2- P7 J5 MX2- 1:1 J7 MX3+ TD3+ P8 J8 MX3- TD3- P9 4 x 75 2x 0.1 F GND P10 1000pF/2KV VCC P1 SHIELD RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENES LEITERPLATTEN-LAYOUT (BESTCKUNGSSEITE) 1,27 0,05 0,64 0,03 2,54 0,10 1 3 5 7 9 0,89 0,04 x10 2 4 6 8 10 1,60 0,06 x2 3,25 0,13 x2 13 14 1,02 0,04 x4 11 12 2,54 8,18 0,32 11,43 0,45 13,26 0,52 15,49 0,61 LED SPECIFICATIONS ELECTRICAL SPECIFICATIONS 25C LED ANWEISUNG TURNS RATIO 1CT:1CT 3% V V I CIRCUIT DIAGRAM OCL (100 KHz, 0.1 V, 8 mA) 350 H MIN COLOR ff f INSERTION LOSS FARBE SCHALTPLAN MAX mA TYP 1-100 MHz -1.1 dB MAX RETURN LOSS YELLOW 2.1 2.5 13 14 20 11 12 1-40 MHz -18 dB MIN 60 MHz -14 dB MIN GREEN 2.2 2.5 20 13 14 11 12 80 MHz -12 dB MIN 100 MHz -10 dB MIN CROSSTALK 1-100 MHz -35 dB TYP CMR 1-30 MHz -38 dB TYP 30-60 MHz -35 dB TYP 60-100 MHz -30 dB TYP ISOLATION 1,500 Vrms Information: Tolerances Scale 2:1 All Dimensions +/- 0,2mm in mm Designation All rights reserved. Only for Information. Subject to modification without Mod-Jack - MJIM To ensure that this is the latest prior notice. version of this drawing, please Drawing will not be updated. 8C10T. INTEGRATED MAGNNETICS contact one of the ERNI companies before using. I (2/2) www.ERNI.com 203511 a 04.09.2012 A3 Index Date Class MJIM Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. 4,06 0,16 3,05 0,12 2,54 0,10 8,89 0,35