General Purpose Solar Relays OEG Power PCB Relay PCFN Solar, 1.8 mm contact gap n 1 pole 26A, 1 form A (NO) contact n Contact gap >1.8mm n 200mW hold power n Ambient temperature up to 75C at 26A, 85C at 22A, 90C at 18A n Product in accordance to VDE 0126-1-1 and IEC 62109-2 Typical applications Photovoltaic Inverter, charging stations, ... Z Contact Data Coil Data Contact arrangement 1 form A (NO) Rated coil voltage 12 to 24VDC Contact gap >1.8mm Coil insulation system according UL Class F Rated voltage 277VAC Rated current 26A Coil versions, DC coil Breaking capacity max. 7200VA Coil Rated Operate Release Coil Rated coil Contact material AgSnO code voltage voltage voltage resistance power 2 -1 Frequency of operation, with/without load 6/300min VDC VDC VDC 10% W 1) Operate/release time max. 20/10ms 12 12 8,4 1,2 96 1.5 2) Bounce time max., form A 3ms 24 24 16,8 2,4 384 1.5 1) Ambient temperature > 23C requires reduction of coil voltage to 4.4 to <6V after Contact ratings 100ms. Hold voltage >=4.4V at ambient temperature 90C. Type Contact Load Cycles IEC 61810 / UL 508 2) Ambient temperature > 23C requires reduction of coil voltage to 8.8 to <12V after 3 PCFN-1..H2MS A (NO) 26A, 277VAC, cos =1, 75C 30x10 100ms. Hold voltage >=8.8V at ambient temperature 90C. 3 PCFN-1..H2MS A (NO) 22A, 277VAC, cos =1, 85C 30x10 3 All figures are given for coil without pre-energization, at ambient temperature +23C. PCFN-1..H2MS A (NO) 18A, 277VAC, cos =1, 90C 30x10 Other coil voltages on request. IEC 61810 3 PCFN-1..H2MS A (NO) 14A, 277VAC, resistive, 85C 100x10 Insulation Data 6 Initial dielectric strength Mechanical endurance, DC coil 1x10 operations between open contacts 2500V rms between contact and coil 4000V rms Clearance/creepage between contact and coil 6.1mm Material group of insulation parts III Tracking index of relay base PTI 175 Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter 3) Ambient temperature -40 to +75C at 26A -40 to +85C at 22A -40 to +90C at 18A Category of environmental protection IEC 61810 RTII - flux proof Vibration resistance (functional) 10g Vibration resistance (destructive) 10g Shock resistance (destructive) 100g Terminal type PCB-THT Mounting distance 10mm Weight 28g Resistance to soldering heat THT IEC 60068-2-20 260C/10s Packaging unit tube/20 pcs., box/500 pcs. 1) 2) 3) Ambient temperature > 23C requires reduction of coil voltage, see index and above. 1 04-2018, Rev. 0418 Catalog and product specification according Catalog and product data is subject to the Catalog product data, Definitions section, www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are 2015 Tyco Electronics Corporation, with the Definitions section. the Definitions section, available at subject to change. a TE Connectivity Ltd. company. General Purpose Solar Relays OEG Power PCB Relay PCFN Solar, 1.8 mm contact gap (Continued) Dimensions PCB layout / terminal assignment Bottom view on solder pins 1,35 NOTE: it is recommended to connect the grid (phase or neutral line) to pin 11 of the PCFN Solar. Product code Version Contact arrangement Contact material Coil Part number PCFN-112H2MS PCB, flux tight 1 form A (NO) contact AgSnO 12VDC 2071169-1 2 PCFN-124H2MS PCB, flux tight 1 form A (NO) contact AgSnO 24VDC 2071169-2 2 2 04-2018, Rev. 0418 Catalog and product specification according Catalog and product data is subject to the Catalog product data, Definitions section, www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are 2015 Tyco Electronics Corporation, with the Definitions section. the Definitions section, available at subject to change. a TE Connectivity Ltd. company.