ASSY USED ON:
ANTI-ROTATIONAL
SET SCREW
9
CODE 18 - BRAID TAIL BACKSHELL
218M716-19C08
SERIES
ORDER NUMBER (TABLE 1)
MANUFACTURER CODE
SEE TABLE 2
MATERIAL
REFER TO CH00-0250-004
FINISH
REFER TO CH00-0250-004 2
ENTRY SIZE (TABLE 2)
NOTES:
1. THIS PRODUCT IS DESIGNED TO TERMINATE A HEAT SHRINKABLE LIPPED
BOOT TO A CONNECTOR.
2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATION,
SEE CH00-0250-004.
3. BACKSHELL TO BE PERMANENTLY MARKED/BAGGED AND LABELLED WITH CODE
IDENTIFICATION NUMBER AND PART NUMBER. (e.g. 06090-218M716-19B08).
4. WHEN ENTRY SIZE EXCEEDSMAX ENTR, A 2 PIECE BACKSHELL (TYPE 2) IS SUPPLIED.
5. BACKSHELL MATES TO MIL-DTL-5015D, CLASS A, E & R, MS3100, MS3101 &MS3106.
RESILIENT INSERT, SOLDER TYPE AND BENDIX 10-214, CANNON CA-RX
COMMERCIAL CRIMP TYPE (LESS ENDBELL).
6. BRAID TERMINATION RING MAY BE SUPPLIED AS TINEL-LOCK SHAPE MEMORY
RING AT MANUFACTURERS OPTION.
7. ALL THREAD SIZES FOR ORDER NO. APPLY.
8. ADDITIONAL PIECE(S) SUPPLIED WHEN CONNECTOR MFR IS UNKNOWN IN TABLE 3)
AND ENTRY SIZE DOES NOT EXCEED VALUE IN TABLE 1.
9. ANTI-ROTATIONAL SET SCREW, THREE #4-40 THREADED HOLES 120 APART, SINGLE
MATING SET SCREW SUPPLIED.
DATE
3RD ANGLE
K.WINCZURA
DRAWN
PROJECTION TITLE:
24/06/2015
NOT TO
CHECKED 24/06/2015 SCALE
BRAID TAIL BACKSHELL
UNLESS OTHERWISE SPECIFIED
APPROVED K.SHEPPARD 01/07/2015
ALL DIMENSIONS IN MILLIMETRES
GENERAL TOL
LINEAR +/-0,25MM
APPROVED H.SMITH 21/10/2015
ANGULAR +/- 1
REVISIONS
LTR DATE APPROVED
DESCRIPTION
MIL-DTL-5015D
D REVISED PER ECO-15-014373 06/10/2015 H.SMITH
E REVISED PER ECO-15-015098 21/10/2015
H.SMITH
TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING DRAWING NO: DRAWING REV: SHT
TE CAGE CODE: 06090 AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD
INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION.
218M7XX E 1
POLAMCO/TE CAGE CODE: U5792ASSY USED ON:
19,50`0,50
SILICONE 23,50 152,40 MIN
SILICONE 27,00 152,40 MIN SILICONE O-RING
O-RING O-RING
TINNED COPPER
SHIELD
9
PART MARK
PART MARK
4
HERE
HERE
STRAIGHT BACKSHELL - TYPE 1
STRAIGHT BACKSHELL - TYPE 2
TABLE 1
TABLE 2
MFR MAX ENTRY Z Y K
SHELL A B
BASE PART
CODE ENTRY SIZE REF REF MAX
SIZE THREAD MAX
NUMBER
TABLE 3 4 03 4,77 13,1 NA
6,35 13,1
8S B 04 3/8-32 UNEF 18,5 04 NA
18,1 05 7,92 13,1 21,0
8S C 04 7/16-28 UNEF
218M708
8S A, R 04 7/16-27 UNS 18,5 06 9,52 17,9 21,0
18,5 11,12 17,9 21,0
8S D 8 04 7 07
218M710 10S - 06 1/2-28 UNEF 19,8 08 12,70 17,9 24,5
21,6 14,27 17,9 24,5
10SL C 07 9/16-24 UNEF 09
10SL A, B, R 07 5/8-24 UNEF 23,2 10 15,87 24,2 29,0
218M711
10SL D 8 07 7 23,2 11 17,47 24,2 32,5
B, C 23,0 19,05 24,2 32,5
12 & 12S 08 5/8-24 UNEF 12
218M712
12 & 12S A, R 08 11/16-24 UNEF 24,9 13 20,62 24,2 35,5
24,9 22,23 30,6 35,5
12 & 12S D 8 08 7 14
14 & 14S - 10 3/4-20UNEF 27,7 15 23,82 30,6 37,0
218M714
- 30,1 25,40 30,6 37,0
218M716 16 & 16S 12 7/8-20 UNEF 16
18 - 13 1-20 UNEF 34,4 17 26,98 33,2 40,0
218M718
20 A, B, C 16 1 1/8-18 UNEF 37,6 18 28,60 33,2 40,0
218M720 37,6 31,80 42,0 43,5
20 R 16 1 1/8-24 UNS 20
20 D 8 16 7 37,6 21 33,34 42,0 48,5
- 40,6 35,00 42,0 48,5
218M722 22 18 1 1/4-18 UNEF 22
24 - 20 1 3/8-18 UNEF 43,6 24 38,10 42,0 52,1
218M724
- 48,6 44,45 49,0 58,5
218M728 28 24 1 5/8-18 UNEF 28
32 B, C 24 1 7/8-16 UN 54,9
218M732
32 A, R 24 1 29/32-18 UN 54,9
TABLE 3
54,9
32 D 8 24 7
MFR CONNECTOR MANUFACTURER
36 B 28 2 1/16-16 UNS 64,6
(MS 3100, MS 3101 & MS 3106)
CODE
64,6
36 R 28 2 1/16-20 UNS
A AMPHENOL - CLASS A
218M736
36 C 28 2 1/8-16 UN 64,6
B BENDIX - CLASS A, E & R
64,6
36 A 28 2 1/8-18 UNS
CANNON - CLASS A, E & R
C
36 D 8 28 7 64,6
D MFR UNKNOWN, CLASS A, E & R
40 B 28 2 5/16-16 UN 70,6
R AMPHENOL - CLASS R
218M740 A, C, R 70,6
40 28 2 3/8-16UN
- MFR CODE NOT REQUIRED
40 D 8 28 7 69,3
- 82,0
218M744 44 28 2 5/8-16 UN
48 C 28 2 13/16-18 UNS 82,0
A, R 82,0
218M748 48 28 2 7/8-16 UN
48 D 8 28 7 82,0
28,40 MAX
8
DATE
3RD ANGLE
K.WINCZURA
DRAWN
PROJECTION TITLE:
24/06/2015
NOT TO
CHECKED 24/06/2015 SCALE
BRAID TAIL BACKSHELL
UNLESS OTHERWISE SPECIFIED
APPROVED K.SHEPPARD 01/07/2015
ALL DIMENSIONS IN MILLIMETRES
GENERAL TOL
LINEAR +/-0,25MM
APPROVED H.SMITH 21/10/2015
ANGULAR +/- 1
REVISIONS
LTR DATE APPROVED
DESCRIPTION
MIL-DTL-5015D
D REVISED PER ECO-15-014373 06/10/2015 H.SMITH
E REVISED PER ECO-15-015098 21/10/2015
H.SMITH
TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING DRAWING NO: DRAWING REV: SHT
TE CAGE CODE: 06090 AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD
INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION.
218M7XX E 2
POLAMCO/TE CAGE CODE: U5792
B
A THREAD
XXXX
Y
Z
K
B
A THREAD
XXXX
B
D
A THREA
Y
Z