311P18-06S7R6

MODEL 44906 GSFC Space Qualified Thermistor Fully Qualified to GSFC S311-P18-06S7R6 Specification for Flight Use 5000 ohm Resistance 25 C Interchangeable 0.1 C, 0 C to 70 C Pressed Disk Ceramic Sensor High sensitivity Thermally conductive epoxy coating that meet Outgassing Requirements 32 AWG, 3 (7.6 cm) long Solder plated copper leads Serialized and Color Coded for Identification NASA Qualified epoxy encapsulated precision interchangeable NTC thermistors for use in extended space flight applications. All parts are fully flight tested and FEATURES characterized. Line re-qualified yearly per MIL-PRF-23648 requirements as specified in S311-P18 document. Resistance (Type 06) available in other lead Flight Qualified and resistance configurations per S311-P18. 5000 ohm Resistance 25 C Interchangeability High Sensitivity Thermally Conductive Epoxy Coating Exhibits <0.66% TML, <0.01% CVCM, 0.10% WVR when tested per ASTM E-595-90 APPLICATIONS Extended Space Applications Low and Mid Range Temperature Applications Tight Tolerance Instrumentation Applications Requiring Sensing Small Changes in Temperature Applications with Outgassing Requirements Page 1 TESS-ANDO-DS0056 TE CONNECTIVITY SENSORS /// MEAS MODEL NUMBER 44906 REV A MODEL 44906 GSFC Space Qualified Thermistor PERFORMANCE SPECS Parameter Units Value 5000 Resistance 25C Ohms 0.1 Tolerance 0C to 70C C 3987 Beta Value 25/85 K 0.4 Tolerance on Beta Value % < 10 Time response in air Seconds 1 Dissipation Constant in air mW/ C 500 Insulation Resistance (Min. of 100 Mohms for 1 sec.) Volts MECHANICAL DETAILS TESS-ANDO-DS0056 TE CONNECTIVITY SENSORS /// MEAS MODEL NUMBER 44906 Page 2 REV A