342A024-25/225-0 Cable Transitions & Breakouts, Y Shape, 3 Branches , 25, 25, Adhesive Precoat Adhesive Requirement 342A024-25/225-0 ACTIVE Raychem TE Internal : 416486-000 Cable Transitions & Breakouts, Y Shape, 3 Branches , 25, 25, Adhesive Precoat Adhesive Requirement View on TE.com> Wire Protection & Management > Heat Shrink Molded Shapes > Cable Transitions & Breakouts Molded Part Shape: Y Shape Number of Branches & Legs: 3 Material Code: 25 Material Systems Code: 25 Adhesive Requirement: Adhesive Precoat Features Product Type Features Molded Part Shape Y Shape Size Code 024 Configuration Features Number of Branches & Legs 3 Adhesive Requirement Adhesive Precoat Body Features Material Fluid Resistant Modified Elastomer Material Code 25 Material Systems Code 25 Dimensions Inside Diameter Range (Leg 2) 3.6 6.6 mm .14 .26 in Inside Diameter Range (Body) 12.7 26.9 mm .5 1.06 in Inside Diameter Range (Leg 1) 12.7 26.9 mm .5 1.06 in Usage Conditions Operating Temperature Range -75 150 C -103 302 F Operation/Application Power Cable Accessory No Industry Standards Government Qualified No 08/19/2021 08:27PM Page1 For support call+1 800 522 6752 342A024-25/225-0 Cable Transitions & Breakouts, Y Shape, 3 Branches , 25, 25, Adhesive Precoat Adhesive Requirement Government Qualified No Other Adhesive Code 225 Molded Part Shape Code 342A Fluid & Chemical Resistance Long-Term Exposure at High Temperature Adhesive Options /225 Precoat Comment Use only with DR-25 tubing. Product Compliance For compliance documentation, visit the product page on TE.com> EU RoHS Directive 2011/65/EU Compliant EU ELV Directive 2000/53/EC Compliant China RoHS 2 Directive MIIT Order No 32, 2016 No Restricted Materials Above Threshold EU REACH Regulation (EC) No. 1907/2006 Current ECHA Candidate List: JAN 2021 (211) Candidate List Declared Against: JAN 2021 (211) Does not contain REACH SVHC Halogen Content Not Low Halogen - contains Br or Cl > 900 ppm. Solder Process Capability Not applicable for solder process capability Product Compliance Disclaimer This information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information they provided. This information is subject to change. The part numbers that TE has identified as EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment products will be CE marked as required by Directive 2011/65/EU. Components may not be CE marked. Additionally, the part numbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2000/53/EC (ELV). Regarding the REACH Regulation, the information TE provides on SVHC in articles for this part number is based on the latest European Chemicals Agency (ECHA) Guidance on requirements for substances in articles posted at this URL: