SOLISTRAND, Budget and DIAMOND GRIP
Catalog 65505
Uninsulated Terminals and Splices Revised 9-00
Product Facts
n SOLISTRAND
Terminals and Splices
n Utilize a brazed seam
n Applied with W crimp
tooling
n Available in wire sizes
26 AWG 600 MCM
2
[0.1304 mm ]
n For terminating solid
& stranded wires
n U.L. Listed
CSA Certified
Military Approved
n Budget
Terminals and Splices
n Utilize a butted seam
n Applied with F crimp
tooling
n Availble in wire
sizes 26 10 AWG
2
[0.16.64 mm ]
n For terminating stranded
wire only
n U.L. Listed
n DIAMOND GRIP
Terminals and Splices
n Utilize a butted seam
SOLISTRAND and Budget terminals and splices fulfill Need more information?
terminals and splices are the need for an economical
n Metal insulation support
Call the AMP Technical
specially designed to termi- and electrically superior ter-
sleeve with V notches
Support Center:
nate solid and stranded mination where extreme
1-800-522-6752
n Applied with a C crimp
wire, irregular shaped con- vibration and tension on the
The Technical Support
n Available in wire sizes
ductors, and combinations wires are not present.
2
Center is staffed with spe-
26-10 AWG (0.1-6.64 mm )
of these retaining the
DIAMOND GRIP utilizes a
cialists well versed in all
superior performance char-
n For terminating stranded
tin plated copper insulation
AMP Products. The Center
a c t e r i s t i c s of single-purpose
wire only
support sleeve with V
can provide you with:
terminals and splices.
notches. The sleeve elimi-
n U.L. Listed
n Technical Support
Corrosion resistance, vibra- nates fraying of the insula-
CSA Certified
n Catalogs
tion resistance and tensile tion or breaking of the con-
n Technical Documents
strength of these terminals ductor. The V notches
n Product Samples
and splices are well within lock the wire insulation
n AMP Authorized
the limits of commercial and against vibration and
Distributor Locations
military specifications. pullout.
The Budget terminal is
Copyright 1994, 1996 and 2000 by
primarily the same as the
AMP Incorporated, Harrisburg, PA.
SOLISTRAND terminals
All Rights Reserved.
without the brazed seam
AMP, AMPOMATOR, A M P - O - L E C T R I C ,
in the wire barrel. These
AMP-TAPETRONIC, C E R T I - C R I M P ,
DIAMOND GRIP, PRO-CRIMPER II,
SOLISTRAND, TAPETRONIC and
DYNA-CRIMP are trademarks.
1
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.SOLISTRAND, Budget and DIAMOND GRIP Catalog 65505
Uninsulated Terminals and Splices Revised 9-00
Table of Contents
How to Compute Circular
Mil Area of Various Wire Shapes ............................................................................................3
Table of SOLISTRAND and Budget Standard Wire Ranges ..................................................3
Table listing: Circular Mil Area for common wire sizes......................................................4 7
Product Descriptions ....................................................................................................8, 9, 10
Stud Hole Sizes ....................................................................................................................11
SOLISTRAND and Budget
Ring Tongue Terminals...........................................................................................12 20
2
26 AWG 600 MCM [0.1 304 mm ]
Right Angle Ring Tongue Terminals............................................................................21
2
22 AWG 300 MCM [0.26 152 mm ]
Heavy Duty Ring Tongue Terminals ......................................................................22, 23
2
16 1/0 AWG [1.04 60.6 mm ]
Rectangular Tongue Terminals ..............................................................................24, 25
2
22 10 AWG [0.26 6.64 mm ]
Spade Tongue Terminals ..............................................................................................26
2
26 10 AWG [0.1 6.64 mm ]
Short Spring Spade Tongue Terminals ................................................................27, 28
2
26 10 AWG [0.1 6.64 mm ]
Long Spring Spade Tongue Terminals .......................................................................29
2
26 10 AWG [0.1 6.64 mm ]
Flanged Spade Tongue Terminals ..............................................................................30
2
26 10 AWG [0.1 6.64 mm ]
Slotted Ring Tongue Terminals ...................................................................................31
2
26 10 AWG [0.1 6.64 mm ]
Hook Tongue Terminals ................................................................................................32
2
22 10 AWG [0.26 6.64 mm ]
Tab Tongue Terminals...................................................................................................32
2
22 8 AWG [0.26 10.5 mm ]
Flag Ring Tongue Terminals...................................................................................33, 34
2
16 4/0 AWG [1.04 117 mm ]
Parallel Splices...............................................................................................................35
2
22 AWG 600 MCM [0.26 304 mm ]
Butt Splices ..............................................................................................................36, 37
2
26 AWG 600 MCM [0.1 304 mm ]
DIAMOND GRIP
Ring Tongue Terminals ...........................................................................................38, 39
2
26 10 AWG [0.1 6.64 mm ]
Knife Disconnect Splices ..............................................................................................40
2
22 10 AWG [0.26 6.64 mm ]
Slotted Ring Tongue......................................................................................................40
2
26 16 AWG [0.1 1.65 mm ]
Rectangular Tongue Terminals ....................................................................................41
2
22 16 AWG [0.26 1.65 mm ]
Flanged Spade Tongue Terminals ..............................................................................41
2
26 14 AWG [0.1 2.62 mm ]
Spade Tongue Terminals .............................................................................................42
2
26 16 AWG [0.1 1.65 mm ]
Standard B
Knife Disconnect Splices ..............................................................................................43
2
22 8 AWG [0.26 10.5 mm ]
Rectangular Tongue Terminals ....................................................................................43
2
22 14 AWG [0.26 2.62 mm ]
Military Approvals, Part Numbers & Requirements ......................................................44 48
U.L. Requirements..........................................................................................................49, 50
Application Tooling ........................................................................................................51 56
Part Number Index .........................................................................................................57 59
2
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Technical Support Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.