Application Specification DEUTSCH* Size 4, 8, 12, 16, 20 114-151004 Solid Contacts Pin and Socket Contacts 30-Oct-2020 Rev D NOTE All numerical values are in metric units with U.S. customary units in brackets . Dimensions are in millimeters and inches . Unless otherwise specified, dimensions have a tolerance of 0.13 .005 and angles have a tolerance of 2. Figures and illustrations are for identification only and are not drawn to scale. A In the event that there are difference between the information presented in this application specification versus the information found in other instruction material, this application specification will take precedence. 1. INTRODUCTION This specification covers the requirements for application of DEUTSCH size 4 through 20 Solid pins and socket contacts. These contacts are used in any DEUTSCH connectors having size 4 to 20 contact cavities. Each contact features a wire crimp barrel, retention shoulder, wire inspection hole and mating end. The socket features a protective sleeve. In use, the retention shoulder holds the contact in the connector. The contacts are available in loose-piece form for terminating using a pneumatic power press or hand tool. When corresponding with personnel, use the terminology provided in this specification to facilitate inquiries for information. Basic terms and features of this product are provided in Figure 1. Size 16 Shown as example. See Table 1 for other sizes. Pin Contact Socket Contact Wire Barrel Wire Barrel Retention Shoulder Retention Shoulder Inspection Hole Inspection Hole Mating End Protective Sleeve Figure 1 2. REFERENCE MATERIAL 2.1. Revision Summary See Section 7 2.2. Customer Assistance Product Base Part Numbers (listed below) and Product Code (listed below) are representative of DEUTSCH Solid pin and socket contacts. Use of these numbers will identify the product line and help you to obtain product and tooling information. Information can be obtained by visiting our website at www.te.com or calling the number at the bottom of this page. Contact Size Size 4 Size 4 Size 8 Size 12 Size 16 Size 20 Product Code J823 J827 J824 J825 J826 J827 Pin PN 5960-XXX-04 0460-XXX-04 0460-XXX-08 0460-XXX-12 0460-XXX-16 0460-XXX-20 Socket PN 5962-XXX-04 0462-XXX-04 0462-XXX-08 0462-XXX-12 0462-XXX-16 0462-XXX-20 2018 TE Connectivity family of companies PRODUCT INFORMATION 1-800-522-6752 This controlled document is subject to change. All Rights Reserved For latest revision and Regional Customer Service, 1 of 12 Indicates Change visit our website at www.te.com *Trademark. TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners. 114-151004 Size Pin Contact Socket Contact 4 8 12 16 20 Table 1 Nickel Plate Shown as example 2 of 12 Rev D