LENGTH BAG, DISSIPATIVE PINK POLY Meets ANSI/ESD S20.20, Packaging standard ANSI/ESD S541, and Static Control Bag ANSI/ESD S11.4 Level 5 Specifications: Electrical Properties Typical Value Test Procedures/Method Static Decay: < 1.0 sec. ASTM 101 Method 4046 4 11 Surface Resistance: 1 x 10 to < 1 x 10 ohms ANSI/ESD STM11.11 Polycarbonate Haze: NE 72 hr contact Corrosivity Observations: NE MIL-STD-3010, M3005 Physical Properties Material Thickness: 4.0mils (0.004 , 0.1016mm), +/- 10% Melt Index: 0.050 gm/ 10 min ASTM D-1283 Density: 0.923 gm/cc ASTM D-1505 Dart Impact: 230 gms ASTM D-1709 Coefficient of Friction: MD 24,000 psi ASTM D-1894 (unmodified film) 1% Secant Modulus (Stiffness): MD 25,000 psi ASTM D-882 Per ANSI/ESD S541 section 6.1 Inside an ESD Protected Area Packaging used within an EPA (that satisfies the minimum requirements of ANSI/ESD S20.20) shall be: Item Size (in.) Item Size (in.) No. W x L No. W x L Low charge generation. Dissipative or conductive materials for intimate contact. 49100 2 x 3 49110 8 x 12 49101 3 x 4 49111 10 x 12 49102 3 x 5 49112 10 x 14 RoHS 2 and REACH Statement 49103 4 x 6 49113 10 x 20 None of the RoHS 2 restricted materials or REACH substances of very high concern as of 2013-12-16 49104 5 x 7 49114 12 x 16 are intentionally added in manufacturing this product. Ref: European Union Directive 2011/65/EU and 49105 5 x 8 49115 14 x 16 Regulation (EC) No. 1907/2006/CE. See Protektive Pak Limited Warranty at ProtektivePak.com. 49106 6 x 8 49116 15 x 18 49107 6 x 9 49117 16 x 20 49108 6 x 10 49118 18 x 20 49109 8 x 10 49119 18 x 24 Packaged 100 per package Made in the Specifications are subject to change without notice. United States of America TRANSPARENT STATIC DISSIPATIVE (PINK POLY) Dimensional tolerances unless otherwise specified: L: +/- 0.250 / W: +/- 0.250 PROTEKTIVE PAK DRAWING DATE 13520 MONTE VISTA AVENUE, CHINO, CA 91710 NUMBER March PHONE (909) 627-2578 49100 2015 ProtektivePak.com 2015 DESCO INDUSTRIES INC. Employee Owned WIDTH