82A0112
SPECIFICATION CONTROL DRAWING
Date Revision
TITLE
WIRE, RADIATION-CROSSLINKED, MODIFIED FLEXIBLE
04-27-04 P
ETFE-INSULATED, SILVER-COATED COPPER, LIGHTWEIGHT
This specification sheet forms a part of the latest issue of Raychem Specification 80.
INSULATION - RADIATION-CROSSLINKED,
CONDUCTOR - SILVER-COATED COPPER
MODIFIED FLEXIBLE ETFE
TABLE I. CONSTRUCTION DETAILS
FINISHED WIRE
DIAMETER OF
WIRE CONDUCTOR MAXIMUM
STRANDED
SIZE STRANDING RESISTANCE DIAMETER
PART NUMBER CONDUCTOR
(number x AWG) AT 20C
(AWG) (in.) (inch)
1/
MAXIMUM
(ohms/1000 ft.)
WEIGHT
MINIMUM MAXIMUM
(lb/1000 ft)
28 42 x 44 .013 .017 75.5 .029 .003
82A0112-28-* 1.2
26 63 x 44 .017 .021 46.9 .033 .003
82A0112-26-* 1.4
24 105 x 44 .023 .027 28.2 .037 .003
82A0112-24-* 2.1
22 154 x 44 .029 .033 19.2 .043 .003
82A0112-22-* 2.9
20 154 x 42 .037 .043 11.7 .053 .004
82A0112-20-* 4.2
18 259 x 42 .047 .053 7.14 .064 .004
82A0112-18-* 6.7
16 259 x 40 .061 .067 4.62 .079 .004
82A0112-16-* 10.2
14 665 x 42 .078 .086 2.96 .099 .005
82A0112-14-* 16.5
12 665 x 40 .096 .106 1.89 .121 .006
82A0112-12-* 24.8
10 665 x 38 .126 .140 1.12 .157 .009
82A0112-10-* 42.2
8 665 x 36 .157 .173 .714 .195 .010
82A0112- 8-* 66.3
6 1045 x 36 .192 .208 .490 .236 .011 102.
82A0112- 6-*
4 1665 x 36 .265 .285 .326 .318 .013 168.
82A0112- 4-*
2 1665 x 34 .325 .345 .204 .385 .014 253.
82A0112- 2-*
0 2660 x 34 .435 .465 .133 .516 .020 405.
82A0112- 0-*
TABLE II. PERFORMANCE DETAILS
BEND TESTING
WEIGHT
MANDREL DIAMETER
PART NUMBER
(lb) (3%)
(in.) (3%)
1/
CROSSLINKING PROOF TEST
CROSSLINKING PROOF TEST
82A0112-28-* .250
.125
82A0112-26-* .375
.125
82A0112-24-* .375
.250
82A0112-22-* .500
.375
82A0112-20-* .500
.500
82A0112-18-* .500
.500
82A0112-16-* .750
.750
82A0112-14-* 1.00
1.00
82A0112-12-* 1.50
1.50
82A0112-10-* 2.00
1.50
82A0112- 8-* 3.00
2.00
82A0112- 6-* 3.00
2.00
82A0112- 4-* 4.00
2.50
82A0112- 2-* 6.00
3.00
82A0112- 0-* 8.00
4.00
Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice.
Tyco Electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer.
1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE
RRRRR Wire & Cable
ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER.
501 Oakside Avenue
DIMENSIONS ARE IN INCHES, AND UNLESS OTHERWISE DESIGNATED ARE NOMINAL. Redwood City, CA 94063-3800
Phone: 1-800-227-8816
Page 1 of 2
THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
Fax: 1-650-361-6297
REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.SCD Number
SPECIFICATION CONTROL DRAWING Page 2 of 2
82A0112
WIRE RATINGS AND ADDITIONAL REQUIREMENTS
TEMPERATURE RATING: 150C
Maximum continuous conductor temperature
VOLTAGE RATING: 600 volts (rms) at sea level
COLOR: White preferred
CONCENTRICITY: 70% (minimum)
CROSSLINKING PROOF TEST: 300 3C,
30 minutes for AWG 28 - 14, 1 hour for AWG 12 - 0
IDENTIFICATION AND COLOR STRIPING DURABILITY:
125 cycles (250 strokes) (minimum), 500 g weight
INSULATION ELONGATION AND TENSILE STRENGTH:
AWG 28-26, Elongation, 75% (minimum)
Tensile Strength, 3000 lbf/in (minimum)
AWG 24 - 10, Elongation, 75% (minimum)
Tensile Strength, 3500 lbf/in (minimum)
AWG 8 - 0 Elongation 125% (minimum )
Tensile Strength, 3000 lbf/in (minimum)
INSULATION FLAWS:
Spark Test: 4.2 kV (rms) at 3 kHz
Impulse Dielectric Test, 6.0 kV (peak)
INSULATION THICKNESS:
AWG 28-16, .004 in. (minimum)
AWG 14-10 .006 in. (minimum)
AWG 8-0 .012 in. (minimum)
PRODUCT IDENTIFICATION: Black ink only for AWG 28 - 10,
Black ink preferred for AWG 8 & larger
SECANT MODULUS:
4
AWG 28-10, 5.0 x 10 lbf/in (maximum),
4
AWG 8-0, 4.0 x 10 lbf/in (maximum),
2% strain, 2 inch jaw separation, 0.2 inch/minute, procedural reference ASTM D 882
SHRINKAGE: 150 3C for 6 hours,
AWG 28 - 10, 0.13 inch (maximum) in 12 inches
AWG 8- 0, 0.25 inch (maximum) in 12 inches
VOLTAGE WITHSTAND TEST (POST ENVIRONMENTAL):
2500 volts (rms), 60 Hz
1/ PART NUMBER:
The in the part numbers on page 1 shall be replaced by
color code designators.
Example: AWG 22, white: 82A0112-22-9
AWG 22, white with black stripe: 82A0112-22-90
1/ See footer section on page 1