Instruction Sheet 408-4523 Extraction Tool 90471-1 25 JUL 11 Rev A Wires SL-156 Connector Housing Locking Lance of SL-156 Extraction Tool Receptacle Contact Locking Lance Slot Stop Tip Figure 1 Do not re-insert the removed contact into the 1. INTRODUCTION NOTE connector. Extraction Tool 90471-1 extracts an individual SL-156 Receptacle Contacts 770476- from SL-156 i Connector Housing 770849- . See Figure 1 for an SL-156 receptacle contact and connector housing. 3. Remove the tool straight from the connector. The illustration is for identification only and is not NOTE 4. MAINTENANCE AND INSPECTION drawn to scale. To ensure proper operation, it is recommended that i the tool be inspected immediately on its arrival and at regularly scheduled intervals. The tool is not Reasons for reissue of this instruction sheet are repairable and should be replaced when worn or provided in Section 5, REVISION SUMMARY. damaged. It is recommended that the tool be stored in a clean, dry place and cleaned with a soft, lint-free 2. DESCRIPTION (See Figure 1) cloth. The tip of the extraction tool is designed to enter the Additional tools can be purchased from: locking lance slot of the connector and depress the CUSTOMER SERVICE (038-035) contact locking lance. The tool stop prevents contact TYCO ELECTRONICS CORPORATION damage due to over-insertion of the extraction tool. PO BOX 3608 HARRISBURG PA 17105-3608 3. EXTRACTION PROCEDURE 1. Position the extraction tool as shown in Figure 1. 5. REVISION SUMMARY Insert the tip straight into the connector locking Revisions to this instruction sheet include: lance slot of the contact to be removed until the tool stop bottoms on the connector housing. Changed company logo Added Original Instructions 2. Grasp the wire of the contact being removed, and pull the contact out of the connector. 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company TOOLING ASSISTANCE CENTER 1-800-722-1111 This controlled document is subject to change. 1 of 1 All Rights Reserved PRODUCT INFORMATION 1-800-522-6752 For latest revision and Regional Customer Service, *Trademark visit our website at www.te.com LOC B TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or Company names may be trademarks of their respective owners. ORIGINAL INSTRUCTIONSX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Extraction, Removal & Insertion Tools category: Click to view products by TE Connectivity manufacturer: Other Similar products are found below : M8196914-08 768211-2 809-131 844751-2 8-59558-2 91018-1 12014013 12093647 1-21048-0 R282867020 12093078 1-21048-6 12121897 DCF.91.405.5LT 1322 15314260 15350698 15350707 15430130 1579018-4 1643916-1 1-679532-0 1976593-3 OUTEXT-0321 2-1579008-3 2-1579008-4 229694-7 231106-1 241469 91040-3 91040-7 965004-000 965069-000 1738219-1 ET-JL05-16 FG 0300 146 3000 FIT-6 210S048 2-1579007-9 231879-1 312138-3 RJ11FODE 356-162 M8196914-10 4-1579018-0 430395-001 483249-1 5- 1579007-2 5-1579007-9 BPR10