CUSTOMER DRAWING Product Product Dimensions Cable Dimensions Name A B C L D E G H0.5 J0.5 min min min max max min max (H0.020) (J0.020) 2.5 3.0 8.0 18.5 3.0 1.5 2.5 6.0 7.0 B-152-03-S (0.098) (0.118) (0.315) (0.728) (0.118) (0.060) (0.098) (0.236) (0.276) 4.3 4.8 8.0 18.5 4.8 2.0 4.3 6.0 7.0 B-152-05-S (0.169) (0.189) (0.315) (0.728) (0.189) (0.079) (0.169) (0.236) (0.276) 6.0 6.7 10.0 21.0 6.7 3.3 6.0 8.0 9.0 B-152-06-S (0.236) (0.264) (0.394) (0.827) (0.264) (0.130) (0.236) (0.315) (0.354) 6.8 7.3 10.0 21.0 7.3 3.3 6.8 8.0 9.0 B-152-07-S (0.267) (0.287) (0.394) (0.827) (0.287) (0.130) (0.267) (0.315) (0.354) 8.7 9.2 10.0 28.5 9.2 4.5 8.7 8.0 9.0 B-152-09-S (0.343) (0.362) (0.394) (1.102) (0.362) (0.177) (0.343) (0.315) (0.354) 10.8 11.5 10.0 28.5 11.5 4.5 10.8 8.0 9.0 B-152-11-S (0.425) (0.452) (0.394) (1.102) (0.452) (0.177) (0.425) (0.315) (0.354) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, radiation cross-linked modified polyolefin. Transparent clear. Marked B-152. 2. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Bi14 (Sn43PB43Bi14) per ANSI/J-STD-006. FLUX: TYPE ROM1 per ANSI/J-STD-004. 3. MELTABLE SEALING RING: Thermally stabilized thermoplastic. Color: blue. 4. MELTABLE SEALING RING: Thermally stabilized thermoplastic. Color: blue transparent gray (size 6). APPLICATION 1. These controlled soldering devices are designed for termination of a bare or tin plated copper shield on a cable, having an insulation rated for at least +85 C, meeting the dimensional criteria listed in the table above. 2. Temperature range: -55 C to +125 C. 3. Parts will meet the requirements of Raychem Specification RT-1404 when installed properly. 4. For installation procedure and application equipment consult Tyco Electronics/Raychem document RCPS-B152. For best results, prepare the cable as shown: TE Connectivity, TE connectivity (logo), Raychem, and SolderSleeve are trademarks TITLE: SOLDERSLEEVE SHIELD TERMINATOR DOCUMENT NO.: Unless otherwise specified dimensions are in millimeters. (Inches dimensions are shown in brackets) B-152-XX-S TOLERANCES: ANGLES: N/A TE Connectivity reserves the right to amend 0.00 N/A this drawing at any time. Users should Revision: Issue Date : 0.0 N/A ROUGHNESS IN evaluate the suitability of the product for April 2020 0 N/A MICRON their application. 3 DATE: PREPARED BY: SCALE: SIZE: SHEET: ECO: ECO-20-004961 25-Apr-03 mforonda None A 1 of 1 Print Date: 16-Apr-20 If this document is printed it becomes uncontrolled. Check for the latest revision. X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Solder Sleeves & Shield Tubing category: Click to view products by TE Connectivity manufacturer: Other Similar products are found below : 899170-000 620040N001 620069N003 CTA-0050-01 629624-000 6500750004 6501390002 CX0781-000 696396-000 697080-000 D-150- 0331CS2902 D-181-1222-90/9CS2800 D-300-01CS1108 715325N001 908357N001 982127-1 D-436-0182CS246 D-436-37CS2651 D-436- 61CS246 D-436-82-CS2621 D-659-0087 E53797N001 CB0213-000 CB0219-000 S200-2-01 S200-4-00CS2904 LSS-81-16AA-CS5575 ST18-2-00 FLX40-020-04-CS8651 325534-000 CTA-0025 D-108-07CS436 D-128-0010 D-141-0108CS404 D-144-41CS1371 D-150-0231- NRCS2896 D-150-1011 395947-000 427243N001 B-801-18-01 515-9 C67137-000 CB0220-000 D-436-0185CS1102 D-436-36CS2908 D- 436-37CS2908 D-436-52CS246 D-436-83CS2705 D44133N001 LSS-26-8A