D-101-31 SolderSleeve Shield Terminators, Operating Temperature (Max) 150 C, Expanded Inside Diameter (Min) .18 in 4.57 mm D-101-31 ACTIVE Raychem TE Internal : 620143-000 SolderSleeve Shield Terminators, Operating Temperature (Max) 150 C, Expanded Inside Diameter (Min) .18 in 4.57 mm View on TE.com> Wire Protection & Management > Interconnect Devices > SolderSleeve Shield Terminators Operating Temperature (Max): 150 C Expanded Inside Diameter (Min): 4.57 mm .18 in Recovered Inside Diameter (Max): 2.54 mm .1 in Pre-Installed Lead: No Wire Temperature (Max): 125 C Features Configuration Features Pre-Installed Lead No Dimensions Expanded Inside Diameter (Min) 4.57 mm .18 in Recovered Inside Diameter (Max) 2.54 mm .1 in Usage Conditions Operating Temperature (Max) 150 C Wire Temperature (Max) 125 C Product Compliance For compliance documentation, visit the product page on TE.com> EU RoHS Directive 2011/65/EU Not Compliant EU ELV Directive 2000/53/EC Not Compliant China RoHS 2 Directive MIIT Order No 32, 2016 Restricted Materials Above Threshold EU REACH Regulation (EC) No. 1907/2006 Current ECHA Candidate List: JAN 2021 (211) Candidate List Declared Against: JAN 2021 (211) SVHC > Threshold: Pb (37% in Solder) Article Safe Usage Statements: Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Recycle if possible and dispose of the article by following all applicable governmental regulations relevant to your geographic location. Halogen Content Low Halogen - Br, Cl, F, I < 900 ppm per 08/19/2021 09:18PM Page1 For support call+1 800 522 6752 D-101-31 SolderSleeve Shield Terminators, Operating Temperature (Max) 150 C, Expanded Inside Diameter (Min) .18 in 4.57 mm Halogen Content Low Halogen - Br, Cl, F, I < 900 ppm per homogenous material. Also BFR/CFR/PVC Free Solder Process Capability Not applicable for solder process capability Product Compliance Disclaimer This information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information they provided. This information is subject to change. The part numbers that TE has identified as EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment products will be CE marked as required by Directive 2011/65/EU. Components may not be CE marked. Additionally, the part numbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2000/53/EC (ELV). Regarding the REACH Regulation, the information TE provides on SVHC in articles for this part number is based on the latest European Chemicals Agency (ECHA) Guidance on requirements for substances in articles posted at this URL: