CUSTOMER DRAWING Primary AWG Color Product Dimensions Part Names No. Range Code L Max A2.54 (0.100) D1 D2 D3 Min Min Min D-150-0168 1 26-20 Red 80.52 (3.170) 50.30 (1.970) 3.00 (0.118) 1.14 (0.045) 2.79 (0.110) D-150-0169 1 20-16 Blue 80.52 (3.170) 50.30 (1.970) 4.00 (0.157) 1.63 (0.064) 4.32 (0.170) D-150-0170 1 16-12 Yellow 80.52 (3.170) 50.30 (1.970) 5.00 (0.197) 2.46 (0.097) 4.32 (0.170) D-150-0173 2 26-20 Red 105.92 (4.170) 74.93 (2.950) 9.04 (0.356) 1.14 (0.045) 2.16 (0.085) D-150-0174 2 26-20 Red 105.92 (4.170) 74.93 (2.950) 4.00 (0.157) 1.14 (0.045) 2.16 (0.085) D-150-0175 2 18-16 Blue 105.92 (4.170) 74.93 (2.950) 5.00 (0.197) 1.63 (0.064) 4.32 (0.170) D-150-0176 2 14 Yellow 105.92 (4.170) 74.93 (2.950) 6.00 (0.236) 2.46 (0.097) 4.32 (0.170) D-150-0177 2 12 Yellow 105.92 (4.170) 74.93 (2.950) 9.04 (0.356) 2.46 (0.097) 4.32 (0.170) D-150-0178 3/4 26-20 Red 105.92 (4.170) 74.93 (2.950) 4.00 (0.157) 1.14 (0.045) 2.16 (0.085) D-150-0179 3/4 22-20 Red 105.92 (4.170) 74.93 (2.950) 5.00 (0.197) 1.14 (0.045) 2.16 (0.085) D-150-0180 3/4 18-16 Blue 105.92 (4.170) 74.93 (2.950) 6.00 (0.236) 1.63 (0.064) 4.32 (0.170) D-150-0181 3/4 14-12 Yellow 105.92 (4.170) 74.93 (2.950) 9.04 (0.356) 2.46 (0.097) 4.32 (0.170) MATERIALS 1. SOLDERSHIELD SPLICE SLEEVE: Heat-shrinkable, radiation cross-linked modified polyvinylidene fluoride sleeve, containing two environment resistant sealing rings and a solder impregnated, flux-coated copper-wire braid. Color: Transparent blue. SOLDER: TYPE Sn63 per ANSI J-STD-006. FLUX: TYPE ROM1 per ANSI J-STD-004. 2. CRIMP SPLICE (1, 2, OR 4 PER KIT): Tin-plated copper alloy with color code stripe. 3. SEALING SPLICE SLEEVE (1, 2, OR 4 PER KIT): Heat-shrinkable, radiation cross-linked modified polyvinylidene fluoride sleeve, containing two environment resistant sealing rings. Transparent blue. APPLICATION These kits are designed to make an environment-resistant, 1 to 1 in-line splice in shielded single, twisted pair, trio and quad cables having tin or silver-plated conductors and insulations rated for 135C minimum. Temperature rating: -55C to +150C. For installation procedures refer to the applicable sections of TE Connectivitys Process Standard RCPS 150-02. TITLE: (1 TO 1 SPLICES-CRIMP) SOLDERSHIELD SPLICE KIT, SHIELDED CABLE DOCUMENT NO.: Unless otherwise specified dimensions are in millimeters. Raychem Devices Inches dimensions are shown in brackets D-150-0168-0170/0173-0181 TOLERANCES: ANGLES: N/A Tyco Electronics reserves the right to 0.00 N/A amend this drawing at any time. Users REV: DATE: 0.0 N/A ROUGHNESS should evaluate the suitability of the 0 N/A IN MICRON product for their application. M1 March 5, 2018 PREPARED BY: CAGE CODE: REVISED PER: SCALE: SIZE: SHEET: A.REY 06090 ECO-18-003345 NTS A 1 of 1 2015-2018 TE CONNECTIVITY CORP. All Rights Reserved. If this document is printed it becomes uncontrolled. Check for the latest revision. X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Solder Sleeves & Shield Tubing category: Click to view products by TE Connectivity manufacturer: Other Similar products are found below : 899170-000 620040N001 620069N003 CTA-0050-01 629624-000 6500750004 6501390002 CX0781-000 696396-000 697080-000 D-150- 0331CS2902 D-181-1222-90/9CS2800 D-300-01CS1108 715325N001 908357N001 982127-1 D-436-0182CS246 D-436-37CS2651 D-436- 61CS246 D-436-82-CS2621 D-659-0087 E53797N001 CB0213-000 CB0219-000 S200-2-01 S200-4-00CS2904 LSS-81-16AA-CS5575 ST18-2-00 FLX40-020-04-CS8651 325534-000 CTA-0025 D-108-07CS436 D-128-0010 D-141-0108CS404 D-144-41CS1371 D-150-0231- NRCS2896 D-150-1011 395947-000 427243N001 B-801-18-01 515-9 C67137-000 CB0220-000 D-436-0185CS1102 D-436-36CS2908 D- 436-37CS2908 D-436-52CS246 D44133N001 LSS-26-8A 626168-000