HTCM-SCE HIGH TEMPERATURE CABLE MARKER TECHNICAL DATASHEET TTDS-022 Revision 3, September 2014 HTCM-SCE Cable Markers are flat, non-adhesive labels that can be used to identify large cables and wire bundles in particularly aggressive environments. Cable Markers can be applied post cable termination using cable ties. Manufactured using a specially developed radiation cross-linked fluoropolymer, and formulated to give High Temperature, and Low Out Gassing performance which allows this product to be used in extreme environments, including space application. Suitable for Mass Transit, Military, Aerospace and Heavy Industrial applications. Cable Markers are available as part of a complete printing system from TE Connectivity. The system comprises of specific printers, ink cartridges and WINTOTAL software. This product is printed using a dot matrix system, also available is HTCM-SCE-TP for thermal transfer printing. PAGE 1 CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04 TE Proprietary Information RAIL /// TTDS-022 HTCM-SCE CABLE MARKER TECHNICAL DATA SHEET TTDS-022 Features High temperature performance Self-extinguishing, non-flame propagating Low vacuum out gassing identification marker - suitable for use on Spacecraft Resistant to key military, aviation, rail and heavy industrial fluids (defined by RW-2524) Applications Post termination Cable Identification Identification of large cables, wire bundles or pipework Installation friendly easy to replace, ideal for retrofitting and repairs. Cable ties are required for fixing Mass transit, Rail, Aerospace, Marine and Heavy Industrial Temperature Rating Operating Temperature Range -55C to 225C (-67F to 437F) Environmental Does not contain any declarable or prohibited substances from the UNIFE Railway Industry Substances List Does not promote mould growth (ASTM G21 zero rating) No evolution of substances which may corrode electrical conductors or contacts up to 200C (392F) Further information and a downloadable declaration covering RoHS and REACH compliance can be found at the TE Product Compliance Support Centre: