JMGAPDD-18P TE Connectivity

CII Low Signal Relays Double Pole, Electrically Held, 1 Amp and Less (Continued) MGA, MGAD, MGADD MGA MGAD MGADD Standard .100 Grid Standard .100 Grid Standard .100 Grid Diode High Performance Relay Diode Suppressed Suppressed/Protected High Performance Relay High Performance Relay Qualified to MIL-R-39016/17 Qualified to Qualified to MIL-R-39016/18 MIL-R-39016/19 X2 X2 X1 A2 B2 A2 B2 A2 B2 A1 B1 A1 B1 A1 B1 A3 B3 A3 B3 A3 B3 + + X1 X1 X2 Terminal View Terminal View Terminal View Product Facts Product Facts Product Facts n Hermetically sealed n Suppression diode n Suppression & protection diodes n High shock & vibration n Hermetically sealed ratings n Hermetically sealed n High shock & vibration n Mounting pads ratings n High shock & vibration ratings n Excellent RF switching n Mounting pads n Mounting pads n Excellent RF switching n Excellent RF switching Electrical Characteristics Contact Ratings Contact Arrangement Contact Operations Type Load Min. 2 Form C (DPDT) 1.0 A 28 Vdc Resistive 100,000 Contact Material 250 mA 115 Vac, 60 Hz & 400 Hz Resistive (case not grounded) 100,000 Stationary Gold/platinum/palladium/silver 100 mA 115 Vac, 60 Hz & 400 Hz Resistive 100,000 (gold plated) 0.2 A 28 Vdc Inductive (0.32 Henry) 100,000 Moveable 0.1 A 28 Vdc Lamp 100,000 Gold/platinum/palladium/silver 30 A 50 mVdc Low Level 1,000,000 (gold plated) 0.1 A 28 Vdc Intermediate Current 50,000 Contact Resistance Before Life 100 milliohms max. (measured 10 mA 6 Vdc) After Life 200 milliohms max. (measured 1 A 28 Vdc) .335 (8.51) SQ MAX .375 (9.40) SQ MAX .035 .031 .003 (0.79) Mechanical Life Expectancy (0.98) .280 (7.11) .280 (7.11) 1 million operations MAX MAX Coil Voltage 5 to 26.5 Vdc .100 Coil Power 660 mW max. 25C (2.54) Duty Cycle Continuous TERMINALS C .500 MIN (12.7) Pick-up Voltage Approximately P .187 .010 (4.75 .25) (Length excludes mounting pad) 50% of nominal coil voltage .100 GROUND PIN Pick-up Sensitivity (2.54) .017 (0.43) DIA +.002 (OPTIONAL) . (0.43) DIA + 130 mW max. 25C -.001 8 PINS 9 PINS .370 (9.40) SQ MAX MGA MGA/MGAD/MGADD Header MGA/MGAD/MGADD Enclosure 1-16 Catalog 5-1773450-5 Dimensions are shown for Dimensions are in millimeters USA: +1 800 522 6752 For additional support numbers Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: +86 0 400 820 6015 please visit www.te.com Specifications subject UK: +44 800 267 666 www.te.com to change.CII Low Signal Relays CII Low Signal Relays Double Pole, Electrically Held, 1 Amp and Less (Continued) Operating Characteristics Environmental Characteristics Semiconductor Characteristics MGA, MGAD, MGADD Timing Temperature Range Diode (Continued) Operate Time 2.0 ms max. -65C to +125C 100 Vdc peak inverse voltage (PIV) 1 Release Time 1.0 Vdc max. transient voltage Weight MGA 1.5 ms max. 0.09 oz. (2.55 gms) MGAD/MGADD 4.0 ms max. 0.129 oz. (3.45 gms) w/ mounting pad (suppression diode, protection/ attached suppression diodes) Vibration Resistance Contact Bounce 1.5 ms max. 30 Gs, 10 to 3,000 Hz Dielectric Withstanding Voltage Shock Resistance Between Open Contacts 75 Gs, 6 1 ms max. 500 Vrms 60 Hz QPL Approval Between Adjacent Contacts MIL-R-39016/17 (JMGA) 500 Vrms 60 Hz MIL-R-39016/18 (JMGAD) Between Contacts & Coil MIL-R-39016/19 (JMGADD) 500 Vrms 60 Hz Insulation Resistance 10,000 megohms min. 500 Vdc 1,000 megohms 500 Vdc (coil to case +125C) .014 . 003 (0.36) 0.47 (1.19) DIA .140 .175 DIA (3.564.45) MGA/MGAD/MGADD Mounting Pad Coil Data Coil Nom. Coil Circuit Coil Circuit Pickup Pickup Drop-Out Drop-Out Nom. Coil Resistance Max. Coil Current Current Voltage Voltage Voltage Voltage Power Coil in Ohms Coil Voltage mA (Max.) mA (Min.) Vdc (Max.) Vdc (Max.) Vdc (Min.) Vdc (Min.) (mW) Desig. 10% 25C Voltage (Vdc) (Note) (Note) 25C 125C 25C -65C 25C (Note) MGA/MGAD 5.0 50 n/a n/a 2.7 3.5 0.22 0.14 500 5.8 5 6.0 98 n/a n/a 3.5 4.5 0.28 0.18 367 8.0 6 9.0 220 n/a n/a 5.3 6.8 0.54 0.35 368 12.0 9 12.0 390 n/a n/a 7.0 9.0 0.63 0.41 369 16.0 12 18.0 880 n/a n/a 10.5 13.5 0.91 0.59 368 24.0 18 26.5 1,560 n/a n/a 14.2 18.0 1.37 0.89 450 32.0 26 MGADD 5.0 39 128.2 93.2 3.2 4.0 0.6 0.6 641 5.8 5 6.0 78 78.3 58.3 4.0 5.0 0.7 0.7 462 8.0 6 9.0 220 42.9 33.0 6.3 7.8 0.9 0.8 368 12.0 9 12.0 390 32.8 25.6 8.0 10.0 1.1 0.9 369 16.0 12 18.0 880 22.1 17.5 11.5 14.5 1.4 1.1 368 24.0 18 26.5 1,560 18.5 14.8 15.2 19.0 1.8 1.4 450 32.0 26 Note: Coil resistance not directly measurable. Coil current should be within limits shown when tested at nominal voltage at 25C for 5 seconds max. Ordering Instructions Catalog-selected Relays: The catalog number is derived by choosing the proper CODE for each of the relay characteristics in the order in which the codes are listed. Specifying a Part Number Example: Type Terminals Diodes Ground Pins Coils Mounting Pads MGA CD G -26 W * The part number example shown on this page is for catalog items. For a list of specific QPL part numbers, please see the index in Section 15. 1-17 Catalog 5-1773450-5 Dimensions are shown for Dimensions are in millimeters USA: +1 800 522 6752 For additional support numbers Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: +86 0 400 820 6015 please visit www.te.com Specifications subject UK: +44 800 267 666 www.te.com to change.