M83536/36-003L TE Connectivity

CII Mid-Range Relays CII Mid-Range Relays FCA-125 Series, 25 Amperes, SPDT The Series FCA-125 relay This results in appreciably General Specifications is a polarized single-side increased contact pressure Temperature Rating stable design, where the in both states over that of a -70C TO + 125C flux from a permanent spring return nonpolar Altitude 300,000 Feet magnet provides the design. We also Shock* armature holding force in manufacture other versions Z, Y, & X Enclosures the deactivated state, and of this relay: 200 g for 6 mS W & M Enclosures (Stud Mtg.) its flux path is switched and FCA-325 25 Ampere 100 g for 6 mS combined with the coil flux 3PDT Relay Vibration, Sinusoidal* in the operated state. FCAC-325 25 Ampere Z, Y, & X Enclosures 30 g 33-3000Hz 3PST-NO Relay with 2 amp Product Facts W & M Enclosures (Stud Mtg.) SPDT auxiliary 20 g 33-3000Hz n Hermetically Sealed Vibration, Random* n All Welded Construction Z, Y, & X Enclosures 2 n Balanced Force 0.4 g /Hz 50-2000Hz W & M Enclosures (Stud Mtg.) n Permanent Magnet Drive 2 0.2 g /Hz 50-2000Hz n Contacts Silver Cadmium Dielectric Strength Oxide with Gold Plating At Sea Level All circuits to ground and circuit to n Coils for DC, 50 to 400Hz circuit 1250 V rms Contact Rating Amperes and 400Hz AC Coil to ground 1000 V rms Ratings Are Continuous Duty At 80,000 Feet 350 V rms n Weight 1.6 ounces max. Type of Life (Min.) 115VAC 115VAC 28 VDC Insulation Resistance (45.4 grams) 3 Load Cycles x 10 400Hz 60Hz* Initial (500 VDC) 100 M Min. Resistive 50 25 25 10 n Qualified to M6106/19, After Life or Environmental Tests Inductive 10 12 10 M83536/36, /37 50 M Min. Inductive 20 15 Operate Time at Nominal Motor 50 10 10 8 Voltage Lamp 50 55 DC Relays 10 ms or less AC Relays 15 ms or less *60 Hz loads rated for 10,000 operations Release Time at Nominal 5 Voltage Overload Current 50 AMPS DC, 80 AMPS 400Hz DC Relays 10 ms or less Rupture Current 60 AMPS DC, 100 AMPS 400Hz AC Relays 50 ms or less Contact Make Bounce 1 MILLISECOND AT NOMINAL VOLTAGE Max. Contact Drop at 25 Amps INITIAL 0.150 VOLTS * Max. contact opening under vibration End of Life 0.175 VOLTS or shock 10 microseconds Coil Data Over Temperature Range Coil Nominal Freq. DC Res. Pickup or Dropout or Must Hold Code Voltages Hz AC Amps (B) Below Volts Above Volts Voltage (C) 16 DC 20 4.5 0.3 2.5 2 12 DC 80 9.0 0.75 4.5 3 28 DC 320 18.0 1.5 7.0 4 (A) 28 DC 320 18.0 1.5 7.0 5 48 DC 920 32.0 2.5 14.0 6 28 400Hz 180 mA 22.0 1.25 10.0 7 28 50/400Hz 100 mA 22.0 1.25 10.0 8 115 400 Hz 40 mA 90.0 5.0 40.0 9 115 50/400 Hz 30 mA 95.0 5.0 40.0 A. CODE 4 COILS HAVE BACK EMF SUPPRESSION TO 42 VOLTS MAX. B. DC COIL RESISTANCE 10% AT 25C AC COIL MAX. CURRENT AT NOMINAL VOLTAGE. C. RELAY WILL STAY IN PICKED-UP STATE DOWN TO MUST HOLD VOLTAGES SHOWN. D. MAX. OVERVOLTAGE: 6 & 12 VDC COILS 120% OF NOMINAL ALL OTHERS 110% OF NOMINAL. E. COILS AVAILABLE FOR OTHER VOLTAGES AND FOR AC 50/60HZ. NOTE: Only DC Coil Models are QPL Approved. 521 Catalog 5-1773450-5 Dimensions are shown for Dimensions are in millimeters USA: +1 800 522 6752 For additional support numbers Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: +86 0 400 820 6015 please visit www.te.com Specifications subject UK: +44 800 267 666 www.te.com to change.CII Mid-Range Relays FCA-125 Series, 25 Amperes, SPDT (Continued) Below are shown the standard terminal types and the enclosures available. Specify the assembly as indicated under How To Order. Dimensions are shown in inches .010 and (Millimeters .25). Terminals Enclosures 522 Catalog 5-1773450-5 Dimensions are shown for Dimensions are in millimeters USA: +1 800 522 6752 For additional support numbers Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: +86 0 400 820 6015 please visit www.te.com Specifications subject UK: +44 800 267 666 www.te.com to change.