PRMAP-26X = PRMA COTS TO-5 REL
TE Part # 3-1617108-5
TE Internal #: PRMAP-26X
PRMAP-26X = PRMA COTS TO-5 REL ACTIVE
CII
TE Part # 3-1617108-5
TE Internal #: PRMAP-26X
View on TE.com>
Relays, Contactors & Switches > Relays > Mil-Aero Relays > TO-5/.100 Grid Relays
Contact Arrangement: 2 Form C, DPDT, 2 C/O
Input Voltage: 26.5 VDC
Coil Suppression Diode: Without
MOSFET Driver: Without
Transistor Driver: Without
Features
Product Type Features
Enclosure Type Hermetically Sealed
Relay Type Military/Aerospace High Performance
Coil Latching Without
Product Type Relay
MOSFET Driver Without
Configuration Features
Transistor Driver Without
Electrical Characteristics
Coil Magnetic System Non-Polarized, Monostable
Vibration 30G's, 10 3000Hz
Actuating System DC
Shock 75G's, 6ms
Coil Power Measurement Milliwatts
Input Voltage 26.5 VDC
Coil Suppression Diode Without
Coil Voltage 26.5 VDC
Coil Resistance 1560
Coil Power Rating (DC) 450 mW
Coil Polarity Protection Diode Without
Contact Switching Voltage (Max) 28
08/23/2019 01:46PM | Page1
For support call+1 800 522 6752
PRMAP-26X = PRMA COTS TO-5 REL
TE Part # 3-1617108-5
TE Internal #: PRMAP-26X
Contact Switching Voltage (Max) 28
Contact Features
Contact Current Class Low Level 1 A
Contact Arrangement 2 Form C, DPDT, 2 C/O
Contact Current Rating 1 A
Termination Features
Termination Type PC Pins
Mechanical Attachment
Mounting Type Printed Circuit Board
Usage Conditions
Operating Temperature Range -65 125 C
Other
Comment X Level Testing
Product Compliance
For compliance documentation, visit the product page on TE.com>
EU RoHS Directive 2011/65/EU Not Compliant
EU ELV Directive 2000/53/EC Not Compliant
China RoHS 2 Directive MIIT Order No 32, 2016 Restricted Materials Above Threshold
EU REACH Regulation (EC) No. 1907/2006 Current ECHA Candidate List: JAN 2019
(197)
Candidate List Declared Against: JAN 2019
(197)
Halogen Content Not Yet Reviewed for halogen content
Solder Process Capability Not lead free process capable
Product Compliance Disclaimer
This information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge
based on the information they provided. This information is subject to change. The part numbers that TE has identified as
EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent
chromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP, and 0.01% for cadmium, or qualify for an exemption to these
limits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment products
will be CE marked as required by Directive 2011/65/EU. Components may not be CE marked.Additionally, the part
numbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenous
materials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an exemption to these limits
as defined in the Annexes of Directive 2000/53/EC (ELV). Regarding the REACH Regulations, TEs information on SVHC in
articles for this part number is still based on the European Chemical Agency (ECHA) Guidance on requirements for
substances in articles(Version: 2, April 2011), applying the 0.1% weight on weight concentration threshold at the finished
product level. TE is aware of the European Court of Justice ruling of September 10th, 2015 also known as O5A (Once An
Article Always An Article) stating that, in case of complex object, the threshold for a SVHC must be applied to both the
product as a whole and simultaneously to each of the articles forming part of its composition. TE has evaluated this ruling
08/23/2019 01:46PM | Page2
For support call+1 800 522 6752