General Purpose Relays Industrial Relays SCHRACK Miniature Relay PT n 2 pole 12A, 3 pole 10A or 4 pole 6A, 2, 3 or 4 form C (CO) contacts n DC or AC coil n Switching performance up to 3000VA n Relay height 29mm n Mechanical indicator, optional LED and protection diode n Manual test tab, optionally lockable n White marking tabs Typical applications F0191-B Universal use in control and automation Z Approvals Contact Data (continued) VDE Cert. No. 40009108, UL E214025, Lloyds 00/20059 Technical data of approved types on request Contact ratings Type Contact Load Cycles Contact Data PT2 PT3 PT5 UL 508 Contact arrangement 2 form C 3 form C 4 form C PT 2 C (CO) 12A, 250VAC, general purpose, 70C 6.000 3 2 CO 3 CO 4 CO PT 2 C (CO) 12A, 250VAC, resistive, 70C 100x10 3 Rated voltage 240VAC PT 2 A (NO) of C (CO) 12A, 250VAC, resistive, 70C 100x10 3 Max. switching voltage 400VAC 400VAC 240VAC PT 2 A (NO) of C (CO) 12A, 250VAC, resistive, 70C 100x10 Rated current 12A 10A 6A PT 3 C (CO) 10A, 250VAC, general purpose, 70C 6.000 3 Limiting making current, max. 20ms 24A 20A 12A PT 3 C (CO) 10A, 250VAC, resistive, 70C 100x10 3 Limiting breaking current 12A 10A 6A PT 3 A (NO) of C (CO) 10A, 250VAC, resistive, 70C 100x10 3 Limiting short-time current 300A/30ms PT 3 B (NC) of C (CO) 10A, 250VAC, resistive, 70C 100x10 Switching power 3000VA 2500VA 1500VA PT 5 C (CO) 6A, 250VAC, general purpose, 70C 6.000 3 Contact material AgNi90/10, AgNi90/10 gold plated PT 5 C (CO) 6A, 250VAC, resistive, 70C 100x10 3 Min. recommended contact load 12V at 10mA PT 5 A (NO) of C (CO) 6A, 250VAC, resistive, 70C 100x10 3 gold plated: 20mV at 1mA PT 5 B (NC) of C (CO) 6A, 250VAC, resistive, 70C 100x10 Initial voltage drop 30mV at 100mA/6VDC EN60947-4-1 Frequency of operation PT 2 A (NO) of C (CO) 400VAC, 3.75A, AC3, opposite polarity, 70C -1 with/without load 360/36000h PT 2 A (NO) of C (CO) 230VAC, 1.7A, AC5b (400W lamp load), Operate time typ., DC coil 15ms opposite polarity, 70C Release time typ., DC coil, without/with PD 10/18ms PT 3 A (NO) of C (CO) 250VAC, 2A, AC3, opposite polarity 70C Bounce time typ., DC coil, form A/form B 6/8ms PT 3 A (NO) of C (CO) 230VAC, 1.7A, AC5b (400W lamp load), opposite polarity, 70C Contact ratings PT 5 A (NO) of C (CO) 250VAC, 3A, AC3, same polarity 70C Type Contact Load Cycles PT 5 A (NO) of C (CO) 230VAC, 1.7A, AC5b (400W lamp load), IEC 61810 same polarity, 70C 3 PT 2 DC/AC coil C (CO) 12A, 250VAC, cos=1, 70C 70x10 PT 2 A (NO) of C (CO) DC coil, AC-15, 250VAC/4A, opposite polarity 3 PT 2 DC/AC coil A (NO) of C (CO) 9A, 250VAC, cos =1, 80C 150x10 6.050 3 PT 2 DC/AC coil A (NO) of C (CO) 4A, 250VAC, cos =1, 80C 300x10 PT 3 A (NO) of C (CO) DC coil, AC-15, 250VAC/4A, same polarity 6.050 3 PT 3 DC/AC coil C (CO) 10A, 250VAC, cos=1, 70C 100x10 PT 5 A (NO) of C (CO) DC coil, AC-15, 250VAC/4A, same polarity 6.050 3 PT 5 DC/AC coil C (CO) 6A, 250VAC, cos=1, 70C 100x10 PT 2 A (NO) of C (CO) AC coil, AC-15, 250VAC/2A, opposite polarity 6.050 PT 3 A (NO) of C (CO) AC coil, AC-15, 250VAC/2A, same polarity 6.050 PT 5 A (NO) of C (CO) AC coil, AC-15, 250VAC/2A, same polarity 6.050 PT2/3/5 A (NO) of C (CO) DC-13, 24VDC/4A 6.050 Mechanical endurance 6 DC coil 30x10 operations 6 AC coil 20x10 operations Coil Data Coil voltage range 6 to 220VDC 6 to 230VAC Operative range, IEC 61810 DC coil, AC-coil 50Hz 2 AC coil 60 Hz at 70C 90..110% of rated voltage Coil insulation system according UL class 155 (F) 1 08-2020, Rev. 0820 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec - www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2015 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company General Purpose Relays Industrial Relays SCHRACK Miniature Relay PT (Continued) Coil Data (continued) Insulation Data PT2 PT3 PT5 Initial dielectric strength Coil versions, DC coil, standard between open contacts 1200V 1200V 1200V rms rms rms Coil Rated Operate Release Coil Rated coil between contact and coil 2500V 2500V 2500V rms rms rms code voltage voltage voltage resistance power between adjacent contacts 2500V 2500V 2000V rms rms rms 1)2) VDC VDC VDC 10% mW Initial surge withstand voltage 006 6 4.5 0.6 48 750 between contact and coil 5000V (1.2/50s) 012 12 9.0 1.2 192 750 Clearance/creepage 024 24 18.0 2.4 777 741 between contact and coil 3/4mm 048 48 36.0 4.8 3072 750 Material group of insulation parts IIIa 1) 060 60 45.0 6 4845 743 Pollution degree 2 2) 110 110 82.5 11 16133 750 2) 220 220 165.0 22 64533 750 Other Data Coil versions, DC coil with bipolar LED or LED and protection diode Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content Coil code Rated Operate Release Coil Rated coil refer to the Product Compliance Support Center at bipol. LED+ voltage voltage voltage resistance +LED pwr. www.te.com/customersupport/rohssupportcenter 3 1)2) LED PD) VDC VDC VDC 10% mW Ambient temperature -40 to +70C L06 LA6 6 4.5 0.6 48 750+3.5 Cold storage, IEC 60068-2-1 -40C/16h L12 LB2 12 9.0 1.2 192 750+10 Dry heat, IEC 60068-2-2 70C/16h L24 LC4 24 18.0 2.4 777 741+18 Category of environmental protection L48 LE8 48 36.0 4.8 3072 750+38 IEC 61810 RTII - flux proof 1) L60 LG0 60 45.0 6.0 4845 743+56 Vibration resistance (functional), 2) M10 MB0 110 82.5 11.0 16133 750+96.5 form A (NO)/form B (NC) 7/4g 2) N20 NC0 220 165.0 22.0 64533 750+202.5 Shock resistance (functional), 1) Coil resistance 12%, 2) Coil resistance 15%, form A (NO)/form B (NC) 20/5g 3) Protection diode PD standard polarity: +A1/-A2 Terminal type PCB-THT, plug-in All figures are given for coil without pre-energization, at ambient temperature +23C quick-connect Cover retention, pull/push force 100/100N Coil versions, AC coil, 50/60Hz Weight 30g Coil code Rated Operate Release Coil Rated coil Mounting distance, for mounting on PCB 5mm STD LED voltage voltage voltage resistance power Resistance to soldering heat THT 50/60Hz 50/60Hz 50/60Hz IEC 60068-2-20 270C/10s 1)2) VAC VAC VAC 10% VA Packaging unit 10/250pcs. 506 R06 6 4.8/5.4 1.8 11 1.0/0.85 512 R12 12 9.6/10.8 3.6 48 1.0/0.85 524 R24 24 19.2/21.6 7.2 192 1.0/0.79 Accessories 548 R48 48 38.4/43.2 14.4 777 1.0/0.87 For details see datasheet Accessories Miniature Relay PT 560 R60 60 48.0/54.0 18.0 1306 1.0/0.87 Note: indicated contact ratings and electrical endurance data for direct 1) 615 S15 115 92.0/103.5 34.5 4845 1.0/0.86 wiring of relays (according IEC 61810-1) for relays mounted on sockets 2) 730 T30 230 184/207 69.0 19465 1.0/0.90 deratings may apply. 1) Coil resistance 12%, 2) Coil resistance 15% All figures are given for coil without pre-energization, at ambient temperature +23C Product Sets Complete sets consisting of a relay mounted on a socket see Package PT 2 08-2020, Rev. 0820 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec - www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2015 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company