FittingsAdjustable Spring Loaded Quick Release, Dual Threads Quick Release, Single Thread Fluid Sealed FittingsAdjustable Spring Loaded use FEATURES spring loading pressure to hold probe sensors in Fluid Sealed place against the bearing surface for temperature Spring Loaded monitoring. These ttings feature quick release knobs for easy adjustments and fast installation APPLICATIONS in a variety of motors and generators. In addition, Motors they can also be used in other applications that Generators require uid or pressure sealing. Process HVAC dimensions Quick Release, Dual Threads, Standard Quick Release, Single Thread Process Thread Control Thread 1/8 NPT Quick Release Knob Quick Release Knob D D (2.50 ) (1.00 ) (2.50 ) (1.00 ) Quick Release, Dual Threads (For Use With Transmitters) Process Thread Control Thread Quick Release Knob D (2.50 ) (.25 ) D = Inside Diameter FittingsAdjustable Spring Loaded www.meas-spec.com 08/19/2015 1711 139th Lane NW Andover, MN 55304 +1 800.899.9783 temp.eng.us meas-spec.comFittingsAdjustable Spring Loaded performance speci cations Fitting Construction: Installation Instructions Stainless Steel for corrosion resistance Quick Release Knob Fluid Sealing: Standard with Viton O-rings for uid or pressure sealing Pressure Rating: Fluid seals havea maximum pressure rating of 50 psi Step 1: Pull release knob and rotate half turn clockwise to lock open Quick Release Knob In Open Position Step 2: Slide sensor into tting to desired immersion length Quick Release Knob Closed and Spring Loaded Step 3: Pull release knob, rotate half turn counter-clockwise and release ordering info FittingAdjustable Spring Loaded Stocked Part Numbers* Model Style Part Number Model Number 695A Quick Release, Dual Threads, Standard (For Use with Connection Heads) R-8575-1 695A 1 B 695F Quick Release, Single Thread, 1/8 NPT Only R-8575-2 695A 1 C 695G Quick Release, Dual Threads (For Use with Transmitters) R-8575-3 695A 1 D Model Process Thread Control Thread R-8575-7 695A 2 B 1 1/2 NPT (Standard) 1/2 NPT R-11614-1 695F 3 B 2 1/2 NPT 3/4 NPT R-11614-2 695F 3 C 3 1/8 NPT ---- R-11614-3 695F 3 D Model D Inside Diameter B 0.188 C 0.215 D 0.250 * Please consult factory for availability. The information in this sheet has been carefully reviewed and is believed to be accurate however, no responsibility is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice to any product herein. Measurement Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and speci cally disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customers technical experts. Measurement Specialties, Inc. does not convey any license under its patent rights nor the rights of others. FittingsAdjustable Spring Loaded www.meas-spec.com 08/19/2015 1711 139th Lane NW Andover, MN 55304 +1 800.899.9783 temp.eng.us meas-spec.com