RMW-10/3-1200/ADH-0 TE Connectivity

RMW Heat-Shrinkable, Medium Wall, Polyolefin Tubing W1 W D D d Table 1: Dimensions Size Minimum Maximum Nominal Recovered Nominal Recovered Expanded I.D. Expanded I.D. Jacket Wall Adhesive Wall (D) (d) (W minus W1) (W1) in. mm. in. mm. in. mm. in. mm. 10/3 .394 10 .118 3 .039 1.0 .010 .25 16/5 .630 16 .197 5 .055 1.4 .012 .30 25/8 .984 25 .315 8 .079 2.0 .014 .35 35/12 1.378 35 .472 12 .079 2.0 .014 .35 50/16 1.968 50 .630 16 .079 2.0 .014 .35 63/19 2.480 63 .748 19 .095 2.4 .016 .40 75/22 2.953 75 .866 22 .106 2.7 .016 .40 85/25 3.346 85 .984 25 .110 2.8 .016 .40 95/29 3.740 95 1.142 29 .122 3.1 .018 .45 115/34 4.527 115 1.339 34 .122 3.1 .018 .45 140/42 5.512 140 1.654 42 .122 3.1 .018 .45 160/50 6.300 160 1.968 50 .126 3.2 .020 .50 180/60 7.087 180 2.362 60 .126 3.2 .020 .50 245/80* 9.646 245 3.150 80 .095 2.4 N/A N/A 285/135* 11.220 285 5.315 135 .055 1.4 N/A N/A * Uncoated Only Material: The tubing shall be fabricated from a modified irradiated polyolefin compounded to produce a homogeneous, uniform product whose outside surface is essentially free from flaws, defects, pinholes, seams, cracks, or inclusions. Color: Black Note: Available with adhesive coating as well as uncoated. Sizes indicated with * in Table 1 are available only as uncoated. Raychem Tubing 2013 Tyco Electronics Corporation. All rights reserved. CUSTOMER DRAWING TE Connectivity Title: RMW 305 Constitution Drive Heat-Shrinkable, Medium Wall, Menlo Park, CA 94025 USA Polyolefin Tubing TE Connectivity reserves the right to amend this drawing at any Document No : time. Users should evaluate the suitability of the product for the RMW application Cage Code: Scale: Size: Rev. Date: Rev.: Sheet: 06090 None A 30-Apr-13 D 1 of 2 If this document is printed it becomes uncontrolled. Check for the latest revision. CUSTOMER DRAWING Table 2: Properties Property Unit Requirement Test Method Dimensions Inch (mm) Table 1 ASTM D2671 Tensile Strength psi (MPa) 1750 minimum (12) ASTM D2671 Ultimate Elongation Percent 350 minimum ASTM D2671 Longitudinal Change Percent +5 to -15 maximum ASTM D2671 Specific Gravity 1.2 maximum ASTM D792 Hardness Shore D 40 - 60 ASTM D2240 Low Temperature Flexibility No cracking ASTM D2671 4 hrs -40C Heat Resistance 168 h 150C Percent 350 minimum ASTM D2671 followed by Ultimate Elongation Fungus Growth Rating of 1 or less ASTM G21 ELECTRICAL Dielectric Strength V/mil (kV/cm) 300 minimum (120) ASTM D149 12 Volume Resistivity Ohm-cm 1 X 10 minimum ASTM D257 CHEMICAL Fluid Resistance 168 hrs 23C Immersion in VDE 0370 oil followed by tests for: Tensile Strength psi 1450 minimum (10) ASTM D2671 Ultimate Elongation Percent 300 minimum Corrosive Effect Noncorrosive ASTM D2671, Proc. A 16 hrs 150C Water Absorption Percent 0.50 maximum ASTM D570 24 hrs 23C Rev.: Document No. Sheet: Rev. Date: D 2 of 2 30-Apr-13 RMW If this document is printed it becomes uncontrolled. Check for the latest revision.