RP420024

General Purpose Relays PCB Relays SCHRACK Power PCB Relay RPII/2 n 2 pole 8 A, 2 form C (CO) or 2 form A (NO) contacts n 4 kv/8 mm coil contact Applications Domestic appliances, UPS F0150-B Z Approvals Coil Data VDE Cert. No. 40025448, UL E214025 Coil voltage range 5 to 110VDC Technical data of approved types on request Operative range, IEC 61810 2 Contact Data Contact configuration 2 form C (CO) or Coil versions, DC coil 2 form A (NO) Coil Rated Operate Release Coil Rated coil Rated voltage / max.switching voltage AC 250 VAC code voltage voltage voltage resistance power 1) Max. switching voltage 400 VAC VDC VDC VDC 10% mW Rated current 8 A (UL: 10A) 005 5 3.5 0.5 54 500 Limiting making capacity, max 4 s, duty factor 10% 14 A 006 6 4.2 0.6 68 500 Breaking capacity max. 2000 VA 012 12 8.4 1.2 270 500 1) Contact material AgNi 90/10 024 24 16.8 2.4 1100 500 1) AgNi0.15 gold flashed 048 48 33.6 4.8 4400 500 1) -1 Frequency of operation with load 600 h 060 60 42.0 6.0 6540 500 1) -1 Frequency of operation without load DC-/REM-coil 36000/18000 h 110 110 77.0 11.0 23100 500 1) Coil resistance 15%. Operate/release time typ. 9/3 ms All figures are given for coil without pre-energization, at ambient temperature +20C. Bounce time typ., form A/form B 2/3 ms Other coil voltages on request. Contact ratings Type Contact Load Cycles IEC61810 3 RP421 A (NO) 8A, 250 VAC, resistive, 35C 100x10 3 RP424 DC-coil A (NO) 8A, 250 VAC, resistive, 35C 100x10 3 RP424 DC-coil C (CO) 5A, 250 VAC, resistive, 70C 20x10 3 RP424 DC-coil A (NO) 8A, 250 VAC, resistive, 70C 30x10 3 RP424 REM A (NO) 8A, 250 VAC, resistive, 35C 50x10 UL508 3 RP421 C (CO) 8A, 250 VAC, gen. purp, 40C 6x10 3 RP424 A (NO) 10A, 250 VAC, gen. purp, 65C 30x10 3 RP424 C (CO) 8A, 250 VAC, gen. purp, 70C 6x10 Mechanical endurance 6 DC-coil version: >20x10 operations 6 REM/bistable version: >1x10 operations Coil versions, REM I (1 coil bistable/remanence) Coil Rated Resistance Magnetisation range Demagnetisation range code voltage 15% MIN./ Vdc MAX./Vdc MIN./ Vdc MAX./Vdc VDC A12 12 115 9 18 3 4.8 A24 24 460 18 36 6 9.6 A48 48 1748 36 72 12 19.2 Coil versions, REM II (2 coil bistable/remanence) Coil Rated Resistance Magnetisation range Demagnetisation range code voltage 15% MIN./ Vdc MAX./Vdc MIN./ Vdc MAX./Vdc VDC F05 5 20 3.7 7.5 3.7 6 F12 12 105 9 18 9 14.4 F24 24 460 18 36 18 28.8 All figures are given for coil without pre-energization, at ambient temperature +20C. Other coil voltages on request. 1 07-2020, Rev. 0720 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec - www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2015 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company General Purpose Relays PCB Relays SCHRACK Power PCB Relay RPII/2 (Continued) Insulation PCB layout / terminal assignment Initial dielectric strength coil-contact circuit 4000V rms Bottom view on solder pins open contact circuit 1000V Dimensions in mm rms adjacent contact circuits 2500V rms Clearance/creepage coil-contact circuit 8/8mm Material group of insulation parts IIIa Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content S0163-CO refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature -40 to +70C 2 form C (CO) contacts Category of environmental IEC 61810 RTII - flux proof, RTIII - wash tight Vibration resistance (functional), form A/form B, 30 to 150Hz 11/1.5g Shock resistance (destructive) 100g Terminal type PCB-THT Resistance to soldering heat THT, IEC 60068-2-20 S0163-BJ flux-proof version 270C / 10s wash-tight version 260C / 5s Relay weight 18g 2 form A (NO) contacts Packaging unit tube/20 pcs., box/500 pcs. Dimensions Dimensions in mm S0163-BK 2 form C (CO) contacts (REM II version/ 2 coils) a) Indicated contact position while or after coil energization with reset S0273-AB voltage. b) for 2 coil version only monostable and REM I (REM II version has 3 coil terminals) Product code structure Typical product code RP 4 2 4 024 Type RP Power PCB Relay RPII/2 Version 4 8A, flux proof 8 8A, wash tight Contact arrangement 2 2 form C (2 CO) 4 2 form A (2 NO) Contact material 2) 1 AgNi0.15 gold flashed 0 Discontinued: AgCdO 4 AgNi 90/10 Coil Coil code: please refer to coil versions table 2) AgCdO contacts are discontinued and replaced with AgNi contacts (see PCN E-18-003947) 2 07-2020, Rev. 0720 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, Definitions sec - www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications 2015 Tyco Electronics Corporation, only together with the Definitions section. the Definitions section, available at are subject to change. a TE Connectivity Ltd. company