RT314A06

General Purpose Relays Interface Power Relay RT 1 pole 12 / 16 A, 2 pole 8 A, 1 CO contact or 2 CO contacts DC- or AC coil Sensitive coil 400 mW Reinforced insulation, protection class II (VDE 0700) 5 kV / 10 mm coil-contact 1pole 12 A with 3.5 or 5 mm pinning Recycleable packaging RoHS compliant (Directive 2002/95/EC) as per product date code 0413 F0269-A Applications Panel boards, mechanical engineering Approvals V REG.-Nr. 6106, Z E214025 Technical data of approved types on request Contact data 1-pole 2-pole Contact configuration 1 CO 2 CO Contact set single contact Type of interruption micro disconnection Rated current 12 / 16 A 8 A Rated voltage / max.switching voltage AC 240/400 VAC Maximum breaking capacity AC 3000 / 4000 VA 2000 VA Limiting making capacity,max 4 s, df 10% 25 / 30 A 15 A Contact material AgNi 90/10 6 6 Mechanical endurance DC coil > 30 x 10 >30x10 6 6 AC coil > 10 x 10 >5 x 10 -1 Rated frequency of operation with / without load 6 / 1200 min Contact ratings Type Load Cycles 3 RT314 16 A, 250 VAC, NO contact, 85C, DF 10%, UL508 50x10 -1 3 RT314 16 A, 250 VAC, NC contact, 70C, 30min 53x10 3 RT314 16 A, 250 VAC, CO contact, VDE 0435 30 x 10 3 RT314 1000 W incandescent lamp, 250 VAC 1.2x10 3 RT314 10 A, 250 VAC, cos=0.6, CO contact, 70C 200x10 -1 6 RT314 5 A / 2 A, 250 VAC, cos=1, motor, NO contact, 10min , 70C 1.1x10 RT314 Pilot duty A300 (NO contact), B300 (CO/NC contact), UL508 RT314 1hp 240 VAC, 1/2hp 120 VAC, NO contact, UL508 RT314 AC15, 6 A, 250 VAC, NO and NC contact, 85C, EN60947-5-1 RT314 DC13, 2 A / 24 VDC, 0.2 A / 250 VDC, NO and NC contact, 85C, EN60947-5-1 3 RT424 8 A, 250 VAC, NO contact, 70C, EN61810-1 100x10 3 RT424 6(2) A, 250 VAC, NO/NC contact, 85C EN60730-1 100x10 RT424 1/2hp 240 VAC, 1/4hp 120 VAC, UL508 RT424 Pilot duty B300, UL508 RT424 8 A, 30 VDC, General Purpose, UL508 Coil data Rated coil voltage range DC coil 5...110 VDC AC coil 24...230 VAC Coil power DC coil typ 400 mW AC coil typ 0.75 VA Operative range 2 Coil insulation system according UL1446 class F 1 Datasheet Rev. EK1 Dimensions are in mm unless Product specification processing information Schrack section. Issued 2005/11 otherwise specified and are according to IEC 61810-1. only to be used together www.tycoelectronics.com shown for reference purposes Product data, technical para- with the Definitions at Specifications subject to www.schrackrelays.com only. meters, test conditions and schrackrelays.com in the change.General Purpose Relays Interface Power Relay RT (Continued) Coil versions, DC-coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ohm mW 006 6 4.2 0.6 90+10% 400 012 12 8.4 1.2 360+10% 400 ++ 024 24 16.8 2.4 1440 10% 400 048 48 33.6 4.8 5520+10% 417 060 60 42.0 6.0 8570+12% 420 110 110 77.0 11.0 28800+12% 420 All figures are given for coil without preenergization, at ambient temperature +23C Other coil voltages on request Coil versions, AC-coil 50Hz Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power 50 Hz 50 Hz 50 Hz VAC VAC VAC Ohm VA ++ 524 24 18.0 3.6 350 10% 0.76 615 115 86.3 17.3 8100+15% 0.76 ++ 730 230 172.5 34.5 32500 15% 0.74 All figures are given for coil without preenergization, at ambient temperature +23C Other coil voltages on request Insulation Dielectric strength coil-contact circuit 5000 Vrms open contact circuit 1000 Vrms adjacent contact circuits 2500 Vrms Clearance / creepage coil-contact circuit W 10 / 10 mm Material group of insulation parts W IIIa Tracking index of relay base PTI 250 V Insulation to IEC 60664-1 Type of insulation coil-contact circuit reinforced open contact circuit functional adjacent contact circuits basic Terminal assignment Bottom view on pins Rated insulation voltage 250 V Pollution degree 3 Rated voltage system 240/400 V 1 CO contact 12 A Overvoltage category III Other data 1-pole 2-pole S0163-BC RoHS - Directive 2002/95/EC compliant as per product date code 0413 Flammability class according to UL94 V-0 Ambient temperature range DC coil -40...+85C 1 CO contact 16 A AC coil -40...+70C Operate- / release time DC coil typ 7 / 3 ms typ 7 / 2 ms Bounce time DC coil, NO / NC contact typ 1 / 3 ms typ 1 / 3 ms S0163-BE Vibration resistance (function), NO / NC contact 20 / 5 g, 30 ... 500 Hz Shock resistance (destruction) 100 g Category of protection RTII Mounting distance 0 mm, dense packing 2 CO contacts 8 A Relay weight 14 g Packaging unit 20 / 500 pcs S0163-BJ Accessories For Details see datasheet Accessories Interface Power Relay RT Dimensions Relay Packages Complete packages consisting of a relay mounted on a socket see Package RT S0272-BA 2 Datasheet Rev. EK1 Dimensions are in mm unless Product specification processing information Schrack section. Issued 2005/11 otherwise specified and are according to IEC 61810-1. only to be used together www.tycoelectronics.com shown for reference purposes Product data, technical para- with the Definitions at Specifications subject to www.schrackrelays.com only. meters, test conditions and schrackrelays.com in the change.