CUSTOMER DRAWING Product Ident. Product Dimensions Cable Dimensions Name Code A B D E F G L1.75 min min max max min min (L0.075) S200-1-00 S2001R 16.50 1.90 2.67 1.90 2.67 0.90 0.50 (0.650) (0.075) (0.105) (0.075) (0.105) (0.035) (0.020) S200-2-00 S2002R 16.50 2.67 3.68 2.67 3.68 1.40 0.75 (0.650) (0.105) (0.145) (0.105) (0.145) (0.055) (0.030) S200-3-00 S2003R 16.50 4.32 5.08 4.32 5.08 2.15 1.25 (0.650) (0.170) (0.200) (0.170) (0.200) (0.085) (0.050) S200-4-00 S2004R 19.10 5.97 6.48 5.97 6.48 3.30 1.80 (0.750) (0.235) (0.255) (0.235) (0.255) (0.130) (0.070) S200-5-00 S2005R 19.10 6.98 7.62 6.98 7.62 4.30 2.50 (0.750) (0.275) (0.300) (0.275) (0.300) (0.170) (0.100) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified fluoropolymer. 2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR: SOLDER: TYPE Sn96 per ANSI / J-STD-006. FLUX: TYPE ROM1 per ANSI / J-STD-004. THERMAL INDICATOR: Fusible ring. 3. MELTABLE RINGS: Environment resistant modified thermoplastic fluoropolymer. Color: light blue. APPLICATION 1. These parts are designed to provide an environment resistant shield termination on cables, rated for 150 C minimum, meeting the dimensional criteria listed, having silver or nickel-plated shields and insulations compatible with the insert material. For compatible insulations consult Tyco Electronics/Raychem. 2. Install using Tyco Electronics approved convection or infrared heating tools in accordance with Tyco Electronics process standard RCPS-100-71. When installed with approved convection or infrared heating tools, assemblies will meet the performance requirements of SAE AS83519. Infrared tools are not recommended for use with black cable jackets. 3. Parts shall be marked with identification code per table. 4. Temperature range: -65 C to +200 C. 5. For best results, prepare the cable as shown: G is the minimum diameter on which the sleeve will seal. TITLE: SOLDERSLEEVE SHIELD TERMINATOR IMMERSION RESISTANT, 200 DEG C, ROHS COMPLIANT Unless otherwise specified dimensions are in millimeters. DOCUMENT NO.: Raychem Inches dimensions are shown in brackets Devices S200-X-00 TOLERANCES: ANGLES: N/A Tyco Electronics reserves the right to 0.00 N/A amend this drawing at any time. Users REV: DATE: 0.0 N/A ROUGHNESS should evaluate the suitability of the D May 24, 2016 0 N/A IN MICRON product for their application. DRAWN BY: CAGE CODE: ECO NUMBER: SCALE: SIZE: SHEET: U.NGUYEN 06090 ECO-16-007432 NTS A 1 of 1 2005-2016 Tyco Electronics Corporation. All rights reserved. If this document is printed it becomes uncontrolled. Check for the latest revision.