TXR54AB9W-1610BI TE Connectivity

TINEL RING SWEPT ELBOW BACKSHELLS (TXR) PROVIDES A SMOOTH 90 CABLE TERMINATION OPTION FOR SCREENED CABLES TE Connectivitys (TE) Tinel Ring (TXR) swept elbow backshells are designed with a smooth internal bore and a continuous bend radius. TE is complementing the recently introduced banding (BT) backshell with a tinel-lock version (TXR) to suit a wide range of circular connectors. These backshells offer up to 20% weight savings over traditional backshells. Swept elbow backshells can be utilized in many aerospace and defense applications where highly reliable termination solutions are required. APPLICATIONS/MARKETS WEIGHT SAVINGS Aerospace Up to 20% over the traditional right angle design Defense MULTIPLE CONFIGURATIONS STANDARDS AND SPECIFICATIONS Multiple shell sizes and plating TXR40 ma tes to MIL-DTL-38999 Series III & IV and when mated shall finishes available provide water-tight seal meeting the requirements of MIL-C-85049 EASY INSTALLATION TXR54 mates to MIL-DTL-26482 Series II and MIL-DTL-83723 Series I and II Simple and fast termination solutions The spin coupling nut allows for improved reliability PART NUMBERING TXR 40 AB 9W 16 08 AI H SERIES HIGH-RELIABILITY SOLUTIONS With a heat shrink boot, CONNECTOR INTERFACE backshells can provide strain 40 relief and cable support to help 54 prevent bending or overflexing MATERIAL & FINISH (TABLE 1) Overall 360 screening against EMI/RFI interference ANGLE NUMBER (TABLE 2) TE REPAIR RINGS ENTRY SIZE (TABLE 3) TE has a wide variety of Side Entry Tinel (SETR) repair rings RING OPTION available for rework in the field AI To Suit Single Braid BI To Suit Double Braid MODIFICATION CODE H Helical Conduit Thread For no modification, leave blank. *Contact TE for all modification options AEROSPACE, DEFENSE & MARINE / TINEL RING SWEPT ELBOW BACKSHELLS (TXR)Tinel Ring Swept Elbow Backshells (TXR) TABLE 1 Code Material & Plating AB Aluminum, cadmium olive drab over electroless nickel AC Aluminum, electroless nickel AZ Aluminum, zinc nickel black passivate over electroless nickel *Contact TE for all material and plating options Connector Interface 40 Connector Interface 54 TABLE 2 TABLE 2 Order Shell A B K F R T Entry Order Shell A B K F R T Entry Number Size Thread Max Max Max Ref. Min Sizes Number Size Thread Max Max Max Ref. Min Sizes 08 09 M12 x 1.0 18.0 19.2 31.9 9.0 6.7 04 08 08 1/2 - 20UNF 15.6 19.2 31.9 9.0 6.6 04 10 11 M15 x 1.0 21.0 22.4 35.1 12.2 10.2 04, 05 10 10 5/8 - 24UNEF 18.6 22.4 35.1 12.2 9.3 04, 05 12 13 M82 x 1.0 24.5 25.6 38.3 15.4 13.5 06, 07 12 12 3/4 - 20UNEF 21.7 25.6 38.3 15.4 12.8 06, 07 14 15 M22 x 1.0 29.0 28.7 41.4 18.5 16.2 07, 08 14 14 7/8 - 20UNEF 24.9 28.7 41.4 18.5 14.7 07, 08 16 17 M25 x 1.0 32.5 31.9 44.6 21.7 19.4 08, 10 16 16 1 - 20UNEF 28.2 31.9 44.6 21.7 17.8 08, 10 18 19 M28 x 1.0 35.5 35.1 47.8 24.9 21.8 10, 12 18 18 1 1/16 - 18UNEF 30.9 35.1 47.8 24.9 19.8 10, 12 20 21 M31 x 1.0 37.0 38.3 51.0 28.1 25.1 12, 14 20 20 1 3/16 - 18UNEF 34.1 38.3 51.0 28.1 23.0 12, 14 22 23 M34 x 1.0 40.0 41.4 54.1 31.2 28.2 14, 16 22 22 1 5/16 - 18UNEF 37.3 41.4 54.1 31.2 26.2 14, 16 24 25 M37 x 1.0 43.5 44.6 57.3 34.4 31.4 16, 18 24 24 1 7/16 - 18UNEF 40.4 44.6 57.3 34.4 29.1 16, 18 TABLE 3 TABLE 3 Entry G H Entry G H J J Size Min 0.3 Size Min 0.3 04 6.35 9.49 +/-0.04 14.0 04 6.35 9.49 +/-0.04 14.0 05 7.92 11.06 +/-0.04 15.5 05 7.92 11.06 +/-0.04 15.5 06 9.53 12.66 +/-0.04 17.1 06 9.53 12.66 +/-0.04 17.1 07 11.10 14.21 +/-0.07 18.7 07 11.10 14.21 +/-0.07 18.7 08 12.70 15.81 +/-0.07 20.3 08 12.70 15.81 +/-0.07 20.3 10 15.88 18.96 +/-0.08 23.5 10 15.88 18.96 +/-0.08 23.5 12 19.05 22.14 +/-0.08 26.7 12 19.05 22.14 +/-0.08 26.7 14 22.23 25.30 +/-0.08 29.8 14 22.23 25.30 +/-0.08 29.8 16 25.40 28.48 +/-0.08 33.0 16 25.40 28.48 +/-0.08 33.0 All dimensions 18 28.58 31.65 +/-0.08 36.2 18 28.58 31.65 +/-0.08 36.2 in mm K K G J G H J H te.com/txr-swept-elbow-backshells 2021 TE Connectivity. All Rights Reserved. 2390915-1 05/21 AMP, AGASTAT, CII, DEUTSCH, DRI, HARTMAN, KILOVAC, MICRODOT, NANONICS, POLAMCO, Raychem, Rochester, SEACON, TE, TE Connectivity and the TE connectivity (logo) are trademarks owned or licensed by TE Connectivity. Other products, logos, and company names mentioned herein may be trademarks of their respective owners. While TE Connectivity (TE) has made every reasonable effort to ensure the accuracy of the information herein, nothing herein constitutes any guarantee that such information is error-free, or any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. The TE entity issuing this publication reserves the right to make any adjustments to the information contained herein at any time without notice. All implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose are expressly disclaimed. The dimensions herein are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. North America +1 800 522 6752 Asia Pacific +86 0 400 820 6015 France +33 1 34 20 86 86 Germany +49 6251 133 1999 United Kingdom +44 800 267 666 Visit te.com for additional country contacts. R R A THREAD T XXXX F B A THREAD T XXXX F