Series C46F/C47F Optically Isolated up to 1.75A Bi-Directional AC/DC Solid-State Relay ELECTRICAL SPECIFICATIONS (25C UNLESS OTHERWISE SPECIFIED) INPUT (CONTROL) SPECIFICATIONS Parameter Min Max Units Control Voltage Range (See Figures 1, 2 and Note 1) 3.8 32 Vdc FEATURES/BENEFITS Input Current 5 V (See Figures 1 and 2) 12 mAdc Power FET Output with Must Turn-On Voltage 3.8 Vdc Very Low On Resistance: Virtually no offset with low Must Turn-Off Voltage (Guaranteed Off) 1.5 Vdc leakage and voltage drop. Switches High Voltages Reverse Voltage Protection -32 Vdc and Currents: Voltages to 360 Vdc. Current to 1.75 OUTPUT (LOAD) SPECIFICATIONS Adc. DC, Bi-directional or Parameter DC Bi-directional AC models Optical Isolation: Isolates Parameter Min Max Min Max Units control elements from load Output Voltage Rating C47F-10 50 C46F-10 50 Vdc transients. Eliminates ground loops and signal C47F-20 90 C46F-20 90 Vdc ground noise. C47F-30 180 C46F-30 180 Vdc Floating Output: Allows for high and low side C47F-40 360 C46F-40 360 Vdc switching. Output Current Rating C47F-10 1.75 C46F10 1.0 Adc High Noise Immunity: Control circuit can not be (See Figure 3) C47F-20 1.0 C46F-20 0.75 Adc triggered by output C47F-30 0.6 C46F-30 0.4 Adc switching noise. 14-pin DIP package C47F-40 0.4 C46F-40 0.25 Adc C47F-10 0.15 C46F-10 0.3 Ohms DESCRIPTION These miniature solid-state On Resistance C47F-20 0.35 C46F-20 0.7 Ohms relays utilize a photovoltaic (See Note 3) C47F-30 1.0 C46F-30 2.0 Ohms generator driving high performance power FET chips C47F-40 2.0 C46F-40 4.0 Ohms to provide low output on- Leakage Current at Rated Voltage 1.0 1.0 mAdc resistance and high output switching capability. The series Surge Rating (% of Rated) <1 sec 200 200 % includes DC switching Turn-On Time C47F-10 3 C46F-10,30,40 3 ms versions with output current ratings up to 1.75 amp, and bi- C47F-20,30,40 1.5 C46F-10 5 ms directional versions to switch Turn-Off Time 1.0 1.0 ms AC or DC up to 1.0 amp. Output voltage ratings of both C47F-10 700 C46F-10 700 pf types range from 50 to 360 Output Capacitance C47F-20 350 C46F-20 350 pf volts. The virtual elimination of (Typical) C47F-30 300 C46F-30 300 pf offset voltage makes them ideal for low level switching C47F-40 250 C46F-40 250 pf applications as well. Input and 9 9 Insulation Resistance 10 10 Ohms output are optically isolated to protect input logic circuits from Dielectric Strength (Input to Output) 1500 1500 Vac output voltage transients. Capacitance (Input to Output) 10 10 pF C46F/C47F 18 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE 2002 TELEDYNE RELAYS C46F/C47F 072002 Q1Series C46F/C47F CHARACTERISTIC CURVES MECHANICAL SPECIFICATION TYPICAL INTERFACE 2002 TELEDYNE RELAYS (800) 284-7007 www.teledynerelays.com C46F/C47F 19 C46F/C47F 072002 Q1