CP030-NIST

Current Probes Key Features Teledyne LeCroy current probes do not require the breaking of a circuit ProBus active probe interface with or the insertion of a shunt to make accurate and reliable current automatic scaling in A/div measurements. Based on a combination of Hall effect and transformer Autozero and degauss capabilities technology, Teledyne LeCroy current probes are ideal for making accurate built into instruments user interface AC, DC, and impulse current measurements. CP030 Wide Range of Applications Fully Integrated 30 A continuous current rms 50 A current peak All Teledyne LeCroy current probes Teledyne LeCroy current probes are 50 MHz bandwidth are powered through the Teledyne available in a variety of models for a LeCroy ProBus connection and CP030A wide range of applications. The full 30 A continuous current require no additional hardware. Along rms range of Teledyne LeCroy current probes 50 A current peak with providing power, the ProBus includes models with bandwidths up 50 MHz bandwidth connection allows the current probe and 1 mA/div sensitivity to 100 MHz, peak currents up to 700 A oscilloscope to communicate, resulting and sensitivities to 1 mA/div. Teledyne CP031 in current waveforms automatically LeCroy current probes are often used 30 A continuous current rms displayed on screen in Amps, and 50 A current in applications such as the design peak calculated power traces scaled correctly 100 MHz bandwidth and test of switching power supplies, in Watts. This full integration also allows motor drives, electric vehicles, and CP031A for Degauss and Autozero functions to 30 A continuous current rms uninterruptible power supplies. be done directly from the oscilloscopes 50 A current peak user interface. 100 MHz bandwidth High Sensitivity 1 mA/div sensitivity The CP030A and CP031A provide a high Deskew Calibration Source sensitivity of 1 mA/div. This allows for CP150 The DCS025 deskew calibration 150 A continuous current more precise low current measurements rms source has both voltage and current 500 A current peak on Teledyne LeCroy oscilloscopes. time-aligned signals, which enables the 10 MHz bandwidth When used with HDO high definition precise deskew of voltage and current CP500 oscilloscopes with HD4096 technology, probes. Most voltage probes along 500 A continuous current rms users will obtain highly accurate, low with 30, 150 and 500A current probes 700 A current peak current waveforms with unmatched 2 MHz bandwidth are compatible with the DSC025. 12-bit resolution for improved debug and analysis.CP031/ CP031A CP030 / CP030A 35 35 35 160 35 550 160 550 35 35 35 35 160 500 550 500 160 550 140 140 30 30 30 30 450 450 500 500 140 140 30 30 30 30 120 120 400 400 25 25 25 25 450 450 120 120 350 350 400 25 100 100 400 25 25 25 20 20 20 20 Current Current Current Current Current Current Current Current 300 300 350 350 100 100 (A ) (A ) (A ) (A ) (A ) (A ) (A ) (A ) rms rms rms rms 80 rms rms rms 80 rms 20 20 20 20 Current Current Current Current Current Current Current Current 250 250 300 300 15 15 15 15 (A ) (A ) (A ) (A ) (A ) (A ) (A ) (A ) rms rms rms rms rms 80 rms 80 rms rms 60 60 200 200 250 250 15 15 15 15 10 10 10 10 60 60 150 150 200 200 40 40 10 10 10 10 100 150 100 150 5 5 40 40 5 5 20 20 50 50 100 100 5 5 5 5 20 20 0 0 0 0 0 0 0 0 50 50 10 100 1 k 10 k 100 k 1 M 10 M 10 100 1 k 10 k 100 k 1 M 10 M 0 0 0 0 0 0 0 0 10 100 101 k 10010 k 1 k100 k 10 k 1 M 100 k10 M 1 M 10 M Frequency (Hz) Frequency (Hz) Frequency (Hz) Frequency (Hz) Frequency (Hz) Frequency (Hz) Frequency (Hz) Frequency (Hz) Frequency (Hz) Frequency (Hz) Frequency (Hz) Frequency (Hz) Frequency (Hz) Frequency (Hz) Frequency (Hz) Frequency (Hz) Maximum Input Current vs. Frequency Maximum Input Current vs. Frequency* 10 10 10 1 10 1 0.100 0.100 10 10 10 10 1 1 0.100 0.100 1 1 1 1 0.1 0.1 1 1 1 1 Insertion Insertion Insertion Insertion 0.1 0.1 Insertion Insertion Insertion Insertion Impedance Impedance Impedance Impedance Impedance 0.1 0.1 Impedance 0.1 0.1 Impedance Impedance 0.010 0.010 Insertion Insertion Insertion Insertion Insertion Insertion Insertion Insertion Impedance Impedance Impedance 0.1 Impedance Impedance Impedance Impedance 0.1 0.1 0.1 Impedance 0.010 0.010 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 Frequency (Hz) Frequency (Hz) Frequency (Hz) Frequency (Hz) Frequency (Hz) Frequency (Hz) Frequency (Hz) Frequency (Hz) Frequency (Hz) Frequency (Hz) Frequency (Hz) Frequency (Hz) Frequency (Hz) Frequency (Hz) Frequency (Hz) Frequency (Hz) Insertion Impedance vs. Frequency Insertion Impedance vs. Frequency* (typical) (typical) *This performance does not apply to CP030-3M model. 2