RF332-5 Teledyne

Series RF312/RF332 DPDT Non-Latching Electromechanical Relay Signal Integrity up to 20Gbps HIGH REPEATABILITY, DC-8 GHz/20Gbps TO-5 RELAYS, DPDT SERIES RELAY TYPE RF312 Repeatable, RF relay RF332 Low Power Operating Coil, RF relay CONSTRUCTION FEATURES DESCRIPTION The following unique construction features and The ultra miniature RF312 is designed to improve manufacturing techniques provide excellent resistance upon the RF300/RF303 relays high frequency to environmental extremes and overall reliability. performance. The RF312/RF332 o ers monotonic Uni-frame motor design provides high magnetic insertion loss to 8 GHz. This improvement in RF e ciency and mechanical rigidity. insertion loss over the frequency range, makes these Minimum mass components and welded relays highly suitable for use in attenuator and other construction provide maximum resistance to shock RF circuits. The sensitive RF332 relay has a high and vibration. resistance coil, thus requiring extremely low operating Advanced cleaning techniques provide maximum power (200 mW typical). assurance of internal cleanliness. Gold-plated precious metal alloy contacts ensure The RF312/RF332 features: reliable switching and signal delity. High repeatability. Hermetically sealed. Broader bandwidth. Solder-Dipped Leads, (RoHS compliant solder Metal enclosure for EMI shielding. option available) Ground pin option to improve case grounding. High isolation between control and signal paths. Highly resistant to ESD. ENVIRONMENTAL AND PHYSICAL SPECIFICATIONS Storage 65C to +125C Temperature (Ambient) Operating 55C to +85C Vibration 10 gs to 500 Hz (General Note I) Shock 30 gs, (General Note I) 6ms half sine Enclosure Hermetically sealed Weight 0.09 oz. (2.55g) max. 2019 TELEDYNE RELAYS (800) 284-7007 www.teledynerelays.com RF312/RF332 Page 1 RF312-RF332 112019 Q4Series RF312/RF332 DPDT Non-Latching Electromechanical Relay Signal Integrity up to 20Gbps SERIES RF312/RF332 TYPICAL RF CHARACTERISTICS (See RF Notes) Isolation Across Contacts (RF Note 4) Isolation Pole to Pole (RF Note 5) 0 0 -10 -10 -20 -20 -30 -30 -40 -50 -40 De-Energized -60 Normally Open Energized -50 Normally CLosed -70 -60 -80 0 1000 2000 3000 4000 5000 6000 7000 8000 0 1000 2000 3000 4000 5000 6000 7000 8000 Frequency (MHz) Frequency (MHz) Insertion Loss (RF Note 6) VSWR (RF Note 6) 0 5 -0.5 4.5 -1 Normally CLosed 4 Normally Open -1.5 3.5 -2 3 -2.5 -3 2.5 -3.5 2 Normally Closed -4 Normally Open 1.5 -4.5 1 -5 0 1000 2000 3000 4000 5000 6000 7000 8000 0 1000 2000 3000 4000 5000 6000 7000 8000 Frequency (MHz) Frequency (MHz) RF312/RF332 Time Response (RF Note 6) RF NOTES 1. Test conditions: a. Fixture: .031 copper clad, reinforced PTFE, RT/duroid 6002 with SMA connectors. (RT/duroid is a registered trademark of Rogers Corporation.) b. Room ambient temperature. c. Terminals not tested were terminated with 50-ohm load. d. Contact signal level: 10 dBm. e. No. of test samples: 4. 2. Data presented herein represents typical characteristics and is not intended for use as specification limits. 3. Data is per pole, except for pole-to-pole data. 4. Data is the average from readings taken on all open contacts. 5. Data is the average from readings taken on poles with coil energized and de-energized. 6. Data is the average from readings taken on all closed contacts. 7. Test fixture effect de-embedded from frequency and time response data. RF312/RF332 Page 2 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE 2019 TELEDYNE RELAYS RF312-RF332 112019 Q4