S134D-5 Teledyne

CENTIGRID AND TO-5 SERIES CENTIGRID S134 SURFACE MOUNT COMMERCIAL RELAYS SENSITIVE DPDT SERIES RELAY TYPE DESIGNATION S134 DPDT basic relay S134D DPDT relay with internal diode for coil transient suppression DPDT relay with internal diodes for coil transient suppression and polarity S134DD reversal protection INTERNAL CONSTRUCTION DESCRIPTION The Series S134 sensitive surface mount Centigrid relay is an ultraminiature, UNI-FRAME hermetically sealed, armature relay. The low profile height (.460 ) and .100 lead spacing make it ideal for applications where extreme packaging density and/or close PC board spacing are required. The specially formed leads are pre-tinned to make the relays ideal for most types of surface mount solder reflow processes. ARMATURE UPPER STATIONARY CONTACT The basic design and internal construction are identical to the Series 134 MOVING CONTACT 2 Centigrid relays, and are capable of meeting Teledyne Relays T R requirements. LOWER STATIONARY The following unique construction features and manufacturing techniques provide CONTACT overall high reliability and excellent resistance to environmental extremes: All welded construction. Unique uni-frame design providing high magnetic efficiency and mechanical rigidity. High force/mass ratios for resistance to shock and vibration. ENVIRONMENTAL AND PHYSICAL SPECIFICATIONS Advanced cleaning techniques provide maximum assurance of internal cleanliness. Storage 65C to +125C Temperature Precious metal alloy contact material with gold plating assures excellent high (Ambient) Operating 55C to +85C current Vibration 30 gs to 3000 Hz and dry circuit switching capabilities. (General Note 1) Shock 75 gs, The Series S134D and S134DD relays have internal discrete silicon diodes for coil (General Note 1) 6 msec, half-sine suppression and polarity reversal protection. Acceleration 50 gs Enclosure Hermetically sealed The sensitive surface mount Centigrid relay has a high resistance coil, thus Weight 0.15 oz. (4.3g) max. requiring extremely low operating power (200 mw typical). The advantages of 260C max. temp. reduced heat dissipation and power supply demands are a plus. Reflow Temperature 1 min. max. S134 Page 83 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE 2003 TELEDYNE RELAYS www.teledynerelays.com S134/1203/Q1SERIES S134 GENERAL ELECTRICAL SPECIFICATIONS (55C to +85C unless otherwise noted) (Notes 2 & 3) Contact Arrangement 2 Form C (DPDT) Rated Duty Continuous Contact Resistance 0.1 ohm max. before life 0.2 ohm max. after life at 1A/28Vdc (measured 1/8 from header) Resistive: 1 Amp/28Vdc Contact Load Ratings (DC) Inductive: 200 mA/28Vdc (320 mH) (See Fig. 2 for other DC Lamp: 100 mA/28Vdc resistive voltage/current ratings) Low Level: 10 to 50 A/10 to 50mV Resistive: 250 mA/115Vac, 60 and 400 Hz (Case undergrounded) Contact Load Ratings (AC) 100 mA/115Vac, 60 and 400 Hz (Case grounded) 10,000,000 cycles (typical) at low level Contact Life Ratings 1,000,000 cycles (typical) at 0.5A/28Vdc resistive 100,000 cycles min. at all other loads specified above Contact Overload Rating 2A/28Vdc Resistive (100 cycles min.) Contact Carry Rating Contact factory Coil Operating Power 200 milliwatts typical at nominal rated voltage 25C Operate Time 4.0 msec max. at nominal rated voltage 25C Release Time S134 Series: 2.0 msec max. S134D, S134DD Series: 7.5 msec max. Contact Bounce 1.5 msec max. Intercontact Capacitance 0.4 pf typical Insulation Resistance 10,000 megohms min. between mutually isolated terminals Dielectric Strength Atmospheric pressure: 500 Vrms/60Hz 70,000 ft.: 125 Vrms/60Hz Negative Coil Transient (Vdc) S134D, S134DD 1.0 max Diode P.I.V. (Vdc) S134D, S134DD 100 min. DETAILED ELECTRICAL SPECIFICATIONS (65C to +125C unless otherwise noted) (Note 3) S134-5 S134-6 S134-9 S134-12 S134-18 S134-26 BASE PART NUMBERS S134D-5 S134D-6 S134D-9 S134D-12 S134D-18 S134D-26 (See Note 10 for full P/N example) S134DD-5 S134DD-6 S134DD-9 S134DD-12 S134DD-18 S134DD-26 Nom. 5.0 6.0 9.0 12.0 18.0 26.5 Coil Voltage (Vdc) Max. 7.5 10.0 15.0 20.0 30.0 40.0 S134, S134D 100 200 400 800 1600 3200 Coil Resistance (Ohms 10% 25C) S134DD (Note 4) 64 125 400 800 1600 3200 Min. 56.8 36.3 18.1 12.5 9.6 7.2 Coil Current (mAdc 25C) Note 5 (134DD Series) Max. 78.1 48.9 23.6 16.0 12.2 9.0 S134, S134D 3.5 4.5 6.8 9.0 13.5 18.0 Pick-up Voltage (Vdc, Max.) S134DD 3.7 4.8 8.0 11.0 14.5 19.0 Min. 0.12 0.18 0.35 0.41 0.59 0.89 S134, S134D Max. 2.5 3.2 4.9 6.5 10.0 13.0 Drop-out Voltage (Vdc) Min. 0.7 0.8 0.9 1.0 1.1 1.3 S134DD Max. 2.6 3.0 4.5 5.8 9.0 13.0 TYPICAL DC CONTACT RATING (RESISTIVE) (Note 2) 300 250 200 150 100 50 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 LOAD CURRENT (AMPS DC) FIGURE 1 2003 TELEDYNE RELAYS SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE S134 Page 84 www.teledynerelays.com S134/1203/Q1 CENTIGRID AND TO-5 LOAD VOLTAGE (VDC)