THICK FILM HEATING ELEMENT HTS-15 Series Characteristic HTS-15 series heating elements are made in a thick film technology, on stainless steel substrates. These heaters are designed for contact heating of flat surfaces. In compare with an usual tubular heating elements, heaters on stainless steel substrate provides substantially better temperature transfer and higher power at compact size. These elements can also be useful in applications, where low thickness of the heating element is important. Another application of these elements is to use as a power resistor. HTS-15 series elements have outputs in the form of contact/solder fields, soldered wires, connectors, or screw terminals. Fig. 1. Preview with dimensions mm Parameter Value Rated power (on heatsink) 10 - 200 W Pulse power (2s) (on heatsink) 450 W Power tolerance 10 % Supply voltage 12 - 240 V Dielectric layer breakdown voltage > 2 kV Temperature coefficient of resistance (TCR) 100 ppm/ C Max. element temperature (on surface) 400 C Max. element temperature (with soldered connectors or wires) 170 C Typical values Product marking Supply Rated voltage power 230 V 50 W 230 V 75 W 230 V 100 W 230 V 150 W 230 V 200 W TELPOD S.A. Technical division: +48 (0)12 257 10 12 str. Pilsudskiego 63A Sales division: +48 (0)12 257 10 35 32-050 Skawina fax: +48 (0)12 257 10 13 date: 04 / 2015 www.telpod.pl e-mail: thickfilm telpod.pl Copyright 2015 by Telpod THICK FILM HEATING ELEMENT HTS-15 Series Terminal types HTS-15- -2 HTS-15- -1 Soldered wires Contact / solder fields HTS-15- -3/6.3 HTS-15- -3/4.8 6.3 connectors at 90 4.8 connectors at 90 HTS-15- -4/6.3 HTS-15- -4/4.8 6.3 connectors at 45 4.8 connectors at 45 HTS-15- -5/B HTS-15- -5/A Screw connectors with the screws Screw connectors with the nuts TELPOD S.A. Technical division: +48 (0)12 257 10 12 str. Pilsudskiego 63A Sales division: +48 (0)12 257 10 35 32-050 Skawina fax: +48 (0)12 257 10 13 date: 04 / 2015 www.telpod.pl e-mail: thickfilm telpod.pl Copyright 2015 by Telpod