TM Digital Multimeter Specifications: Basic Functions Range Best Accuracy DC Voltage 40mV/400mV/4V/40V/400V/1,000V (0.5%+1) AC Voltage 40mV/400mV/4V/40V/400V/750V (1%+3) DC Current 400A/4,000A/40mA/400mA/4A/10A (1%+2) AC Current 400A/4,000A/40mA/400mA/4A/10A (1.2%+5) Resistance 400/4k/40k/400k/4M/40M (1%+2) Capacitance 40nF/400nF/4F/40F/400F/4,000F (3%+5) Frequency 10Hz to 10MHz (0.1%+4) Temperature (C) -40C to 1,000C (1.2%+3) Temperature (F) -40F to 1,832F (1.2%+4) Special Functions Display Count 4,000 Auto Range Manual Range Bandwidth (Hz) 45Hz to 400Hz Duty Cycle 0.1% to 99.9% Diode Auto Power Off Around 15 Minutes Continuity Buzzer Low Battery Indication 7.5V Data Hold Relative Mode MAX/MIN RS-232 LCD Backlight Analogue Bar Graph 41 Input Protection Input Impedance for DCV Around 10M General Characteristics Power 9V Battery (6F22) LCD Size 65mm 43mm Product Colour Orange and Grey Product Net Weight 350g Product Size 180mm 87mm 47mm Battery, Test Lead,Muli-Purpose Socket, RS-232 Standard Accessories Interface Cable, Software, Point Contact Temperature Probe TM www.element14.com www.farnell.com www.newark.com www.cpc.co.uk www.mcmelectronics.com Page <1> 28/09/15 V1.0TM Digital Multimeter Part Number Table Description Part Number Digital Multimeter 72-10405 Important Notice : This data sheet and its contents (the Information) belong to the members of the Premier Farnell group of companies (the Group) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Groups liability for death or personal injury resulting from its negligence. Tenma is the registered trademark of the Group. Premier Farnell plc 2012. TM www.element14.com www.farnell.com www.newark.com www.cpc.co.uk www.mcmelectronics.com Page <2> 28/09/15 V1.0