X-On Electronics has gained recognition as a prominent supplier of SN74HC125PWR Buffers & Line Drivers across the USA, India, Europe, Australia, and various other global locations. SN74HC125PWR Buffers & Line Drivers are a product manufactured by Texas Instruments. We provide cost-effective solutions for Buffers & Line Drivers, ensuring timely deliveries around the world.
We are delighted to provide the SN74HC125PWR from our Buffers & Line Drivers category, at competitive rates not only in the United States, Australia, and India, but also across Europe and beyond. A long established and extensive electronic component distribution network has enhanced our global reach and dependability, ensuring cost savings through prompt deliveries worldwide. Client satisfaction is at the heart of our business, where every component counts and every customer matters. Our technical service team is ready to assist you. From product selection to after-sales support, we strive to deliver a seamless and satisfying experience. Are you ready to experience the best in electronic component distribution? Contact X-ON Electronics today and discover why X-On are a preferred choice for the SN74HC125PWR and other electronic components in the Buffers & Line Drivers category and beyond.
The SN74HC125PWR is a medium-speed quad bus buffer/line driver with 3-state outputs manufactured by Texas Instruments. It is designed for 2.7-V to 5.5-V VCC operation, and it has Schmitt triggers input buffers on the A and B ports and 3-state outputs on the Y ports. The device contains four independent gates that provide buffering and line-driver function for bus-oriented applications. The outputs can be disabled (three-state) by using the buffer-enable logic inputs. When the device outputs are enabled, they remain in the last logic state regardless of the inputs. This device is designed to minimize system power requirements by eliminating the active pullup or pulldown current typically required for bus interface. The SN74HC125PWR also supports very low-voltage (VCC = 2.7 V) operation. The device can be used as two 8-bit buffers, two 4-bit buffers, or one 8-bit bus transceiver.
