DF3A5.6LFU,LF

DF3A5.6LFU TOSHIBA Diodes for Protecting against ESD DF3A5.6LFU Product for Use Only as Protection against Electrostatic Unit: mm Discharge (ESD) * This product is for protection against electrostatic discharge (ESD) only and is not intended for any other usage, including without limitation, the constant voltage diode application. The mounting of two devices on an ultra-compact package allows the number of parts and the mounting cost to be reduced. Low Terminal capacitance: C = 8.0 pF (typ.) T Absolute Maximum Ratings (Ta = 25C) Characteristics Symbol Rating Unit Power dissipation P 100 mW Junction temperature T 125 C j Storage temperature range T 55 to 125 C stg Note: Using continuously under heavy loads (e.g. the application of high JEDEC temperature/current/voltage and the significant change in JEITA temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. TOSHIBA 1-2P1A operating temperature/current/voltage, etc.) are within the Weight: 0.006 g (typ.) absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (Handling Precautions/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Electrical Characteristics (Ta = 25C) Characteristics Symbol Test Condition Min Typ. MaxUnit Zener voltage V I = 5 mA 5.3 5.6 6.0 V Z Z Dynamic impedance Z I = 5 mA 50 Z Z Reverse current I V = 3.5 V 1.0 A R R Terminal capacitance C V = 0 V, f = 1 MHz 8 pF T R (between Cathode and Anode) Guaranteed Level of ESD Immunity Test Condition ESD Immunity Level IEC61000-4-2 8 kV (Contact discharge) Criterion: No damage to device elements Start of commercial production 2003-02 1 2014-03-01 DF3A5.6LFU Marking Equivalent Circuit (top view) AU C V T R I V Z Z 10 100 m Ta = 25C f = 1 MHz 10 m 1 m 100 10 1 1 4 6 0 1 2 3 4 5 6 7 0 1 2 3 5 7 8 9 10 ZENER VOLTAGE VZ (V) REVERSE VOLTAGE VR (V) 2 2014-03-01 ZENER CURRENT IZ (mA) TOTAL CAPACITANCE CT (pF)