TLP2962(TP1,F) Toshiba

TLP2962 Photocouplers GaAAs Infrared LED & Photo IC TLP2962TLP2962TLP2962TLP2962 1. 1. ApplicationsApplications 1. 1. ApplicationsApplications Factory Automation (FA) High-Speed Digital Interfacing Measuring Instruments 2. 2. 2. 2. GeneralGeneralGeneralGeneral The Toshiba TLP2962 consists of a high-output GaAAs light-emitting diode coupled with integrated high gain, high-speed photodetectors. The TLP2962 guarantees operation at up to 125 and on supplies from 2.7 V to 5.5 V. It is housed in the DIP8 package. The TLP2962 has an internal Faraday shield that provides a guaranteed common-mode transient immunity of 20 kV/s. 3. 3. FeaturesFeatures 3. 3. FeaturesFeatures (1) Inverter logic type (open collector output) (2) Package: DIP8 (3) Operating temperature: -40 to 125 (4) Supply voltage: 2.7 to 5.5 V (5) Data transfer rate: 15 MBd (typ.) (NRZ) (6) Threshold input current: 5.0 mA (max) (7) Supply current: 4 mA (max) (8) Common-mode transient immunity: 20 kV/s (min) (9) Isolation voltage: 5000 Vrms (min) (10) Safety standards UL-approved: UL1577, File No.E67349 cUL-approved: CSA Component Acceptance Service No.5A File No.E67349 (Note 1) VDE-approved: EN60747-5-5 (Note 1)(Note 1)(Note 1) Option (D4) Note 1: When an EN60747-5-5 approved type is needed, please designate the Option (D4)Option (D4)Option (D4). 4. 4. 4. 4. Packaging and Pin ConfigurationPackaging and Pin ConfigurationPackaging and Pin ConfigurationPackaging and Pin Configuration 1: N.C. 2: Anode 3: Cathode 4: N.C. 5: GND 6: V (Output) O 7: N.C. 8: V CC 11-10C4S Start of commercial production 2011-09 2015 Toshiba Corporation 2016-12-14 1 Rev.4.0TLP2962 5. 5. 5. 5. Internal CircuitInternal CircuitInternal CircuitInternal Circuit 6. 6. Principle of OperationPrinciple of Operation 6. 6. Principle of OperationPrinciple of Operation 6.1. 6.1. 6.1. 6.1. Truth TableTruth TableTruth TableTruth Table Input LED Output H ON L L OFF H 6.2. 6.2. Mechanical ParametersMechanical Parameters 6.2. 6.2. Mechanical ParametersMechanical Parameters Characteristics Min Unit Creepage distances 7.0 mm Clearance distances 7.0 Internal isolation thickness 0.4 2015 Toshiba Corporation 2016-12-14 2 Rev.4.0