TLP3052A,TLP3052AF Photocouplers Infrared LED & Photo Triac TLP3052A,TLP3052AF 1. Applications Solid-State Relays Triac Drivers Home Electric Appliances Office Equipment 2. General The TLP3052A consists of a non zero crossing photo triac, optically coupled to an infrared LED. The TLP3052A is housed in the DIP6 package and guarantees insulation thickness of 0.4 mm (min). Therefore, the TLP3052A meets the reinforced insulation class requirements of international safety standards. 3. Features (1) Halogen-free For details, seeDevices in Halogen-Free Resin Package at the end of this datasheet. (2) Peak off-state voltage: 600 V (min) (3) Non zero crossing functionary (NZC) (4) Trigger LED current: 10 mA (max) (5) On-state current: 100 mA (max) (6) Isolation voltage: 5000 Vrms (min) (7) Safety standards UL-recognized: UL 1577, File No.E67349 cUL-recognized: CSA Component Acceptance Service No.5A File No.E67349 VDE-approved: EN 60747-5-5, EN 62368-1 (Note 1) CQC-approved: GB4943.1, GB8898 Japan Factory Note 1: When a VDE approved type is needed, please designate the Option (D4). Table 3.1 Mechanical Parameters 7.62 mm Pitch 10.16 mm Pitch Characteristics Unit TLP3052A TLP3052AF Creepage distances 7.0 (min) 8.0 (min) mm Clearance distances 7.0 (min) 8.0 (min) Internal isolation thickness 0.4 (min) 0.4 (min) Start of commercial production 2015-08 2016-2020 2020-10-22 1 Toshiba Electronic Devices & Storage Corporation Rev.7.0TLP3052A,TLP3052AF 4. Packaging (Note) TLP3052A TLP3052A(LF1,TP1) TLP3052A(LF5,TP5) 11-7A1005S 11-7A1001S 11-7A10S TLP3052AF TLP3052AF(LF4,TP4) 11-7A1004S 11-7A1002S Note: Through-hole type: TLP3052A, TLP3052AF Lead forming option: (LF1), (LF4), (LF5) Taping option: (TP1), (TP4), (TP5) 5. Pin Assignment 1: Anode 2: Cathode 3: N.C. 4: Triac terminal 6: Triac terminal 2016-2020 2020-10-22 2 Toshiba Electronic Devices & Storage Corporation Rev.7.0