TLP597GA TOSHIBA Photocoupler Photo Relay TLP597GA Cordless Telephone Unit: mm PBX Modem The TOSHIBA TLP597GA consists of an aluminum gallium arsenide infrared emitting diode optically coupled to a photo-MOS FET in a six lead plastic DIP package (DIP6). The TLP597GA is a bi-directional switch which can replace mechanical relays in many applications. 6 pin DIP (DIP6) 1-form-A Peak off-state voltage: 400 V (min) Trigger LED current: 3 mA (max) On-state current: 120 mA (max) On-state resistance: 35 (max) Isolation voltage: 2500 Vrms (min) UL Recognized :UL1577, File No. E67349 JEDEC Pin Configuration (top view) JEITA TOSHIBA 11-7A8 Weight: 0.4 g (typ.) 1 6 2 5 3 4 1 : ANODE 2 : CATHODE 4 : DRAIN D1 5 : SOURCE 6 : DRAIN D2 Schematic 1 6 2 5 4 Start of commercial production 2001/01 1 2014-09-01 TLP597GA Absolute Maximum Ratings (Ta = 25C) Characteristics Symbol Rating Unit Forward current I 50 mA F Forward current derating (Ta 25C) I /C 0.5 mA/C F Peak forward current LED I 1 A FP (100 s pulse, 100 pps) Reverse voltage V 5 V R Junction temperature T 125 C j Off-state output terminal voltage V 400 V OFF A connection 120 On-state current B connection I 120 mA ON C connection 240 Detector A connection 1.2 On-state current derating B connection I /C 1.2 mA/C ON (Ta 25C) C connection 2.4 Junction temperature T 125 C j Storage temperature range T 55 to 125 C stg Operating temperature range T 40 to 85 C opr Lead soldering temperature (10 s) T 260 C sol Isolation voltage (AC, 1 minute, R.H. 60%) (Note 1) BV 2500 Vrms S Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (Handling Precautions/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Device considered a two-terminal device : Pins 1, 2 and 3 are shorted together, and pins 4, 5 and 6 are shorted together. Recommended Operating Conditions Characteristics Symbol MinTyp.MaxUnit Supply voltage V 320 V DD Forward current I 5 7.5 25 mA F On-state current I 120 mA ON Operating temperature T 20 65 C opr Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. Circuit Connections 1 6 LOAD 1 6 LOAD 1 6 LOAD AC DC DC or 2 5 25 25 DC 3 4 34 34 A Connection B Connection C Connection 2 2014-09-01