TLP7820(D4BLF4,E

TLP7820 Photocouplers Optically Isolation Amplifiers TLP7820TLP7820TLP7820TLP7820 1. 1. ApplicationsApplications 1. 1. ApplicationsApplications Motor phase and rail current sensing Power inverter current and voltage sensing 2. 2. 2. 2. GeneralGeneralGeneralGeneral The TLP7820 of isolation amplifiers is designed for current sensing in electronic motor drives. In a typical implementation, motor currents flow through an external resistor and the resulting analog voltage drop is sensed by the TLP7820. 3. 3. FeaturesFeatures 3. 3. FeaturesFeatures (1) Gain accuracy: 0.5 % (Gain rank B) (2) Gain drift: 0.00012 V/V/ (typ.) (3) Nonlinearity (V = 200 mV): 0.02 % (typ.) IN (4) Input offset voltage: 0.9 mV (typ.) (5) V bandwidth (-3 dB): 230 kHz (typ.) OUT (6) Operating temperature range: -40 to 105 (7) Common-mode transient immunity: 15 kV/s (min) (8) Safety standards UL-recognized: UL 1577, File No.E67349 cUL-recognized: CSA Component Acceptance Service No.5A File No.E67349 (Note 1) VDE-approved: EN 60747-5-5, EN 62368-1 (Note 1)(Note 1)(Note 1) CQC-approved: GB4943.1, GB8898 Japan Factory Option (D4) Note 1: When a VDE approved type is needed, please designate the Option (D4)Option (D4)Option (D4). Start of commercial production 2015-09 2016-2020 2020-06-25 1 Toshiba Electronic Devices & Storage Corporation Rev.9.0TLP7820 4. 4. 4. 4. Packaging and Pin AssignmentPackaging and Pin AssignmentPackaging and Pin AssignmentPackaging and Pin Assignment 11-6B1A 4.1. 4.1. 4.1. 4.1. Pin AssignmentPin AssignmentPin AssignmentPin Assignment Pin No. Symbol Description 1 V Input side supply voltage DD1 2 V Positive input IN+ 3 V Negative input IN- 4 GND1 Input side ground 5 GND2 Output side ground 6 V Negative output OUT- 7 V Positive output OUT+ 8 V Output side supply voltage DD2 5. 5. Internal Circuit (Note)Internal Circuit (Note) 5. 5. Internal Circuit (Note)Internal Circuit (Note) Note: A 0.1-F bypass capacitor must be connected between 1 and 4 pins and between 5 and 8 pins. 6. 6. 6. 6. Principle of OperationPrinciple of OperationPrinciple of OperationPrinciple of Operation 6.1. 6.1. Mechanical ParametersMechanical Parameters 6.1. 6.1. Mechanical ParametersMechanical Parameters Characteristics Size Unit Height 2.3 (max) mm Creepage distances 8.0 (min) Clearance 8.0 (min) Internal isolation thickness 0.4 (min) 2016-2020 2020-06-25 2 Toshiba Electronic Devices & Storage Corporation Rev.9.0