TODX2960A(F) FIBER OPTIC TRANSCEIVING MODULE TODX2960A(F) GENERAL PURPOSE OPTICAL TRANSCEIVING MODULE For JIS F07 type optical connector CMOS level interface +5V single power supply LED is driven by differential circuit. 770nm LED 1. Absolute Maximum Ratings (Ta = 25C) Characteristics Symbol Rating Unit Storage Temperature T 40 to 95 C stg Operating Temperature T 40 to 85 C opr Supply Voltage V 0.5 to 6 V CC Input Voltage V 0.5 to V + 0.5 V IN CC High Level Output Current I 20 mA OH Low Level Output Current I 20 mA OL Soldering Temperature T 260 (Note 1) C sol Note 1: Soldering time 10 s (More than 1 mm apart from the package). Using continuously heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (Handling Precautions/ Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). 2. Operating Ranges Characteristics Symbol Min Typ. Max Unit Supply Voltage V 4.75 5.0 5.25 V CC High Level Input Voltage V 3.5 V V IH CC Low Level Input Voltage V 0 1.5 V IL High Level Output Current I 2.0 mA OH Low Level Output Current I 2.0 mA OL Start of commercial production 2016-01 1 2016-04-15 TODX2960A(F) 3. Electrical and Optical Characteristics (Ta = 25C, VCC = 5 V) Characteristics Symbol Test Condition Min Typ. Max Unit Data Rate NRZ Code (Note 2) DC 10 Mb/s H-PCF (Note 3) 0.2 1000 m DC to10 Mb/s Using TODX2960A(F) H-PCF (Note 4) 0.2 700 m Transmission Distance H-PCF (Note 3) 0.2 1000 m DC to 6 Mb/s Using TODX2960A(F) H-PCF (Note 4) 0.2 800 m Using H-PCF and TODX2960A(F) Pulse width 100ns 30 30 ns Pulse cycle 200ns, C =10pF L Pulse Width Distortion tw (Note 3)(Note 4)(Note 5) Using H-PCF and TODX2960A(F) Pulse width 165ns 55 55 ns Pulse cycle 330ns, C =10pF L Fiber Output Power (Note 6) P R = 3.3k 20 14 dBm f Center Emission Wavelength 770 nm C Current Consumption I R = 3.3k 26 50 mA CC Maximum Receivable Power Using H-PCF and TODX2960A(F) P 14 dBm MAX (Note 3)(Note 4)(Note 7) DC to 10 Mb/s Using H-PCF and TODX2960A(F) 29 dBm DC to 10 Mb/s Minimum Receivable Power P MIN (Note 3)(Note 4)(Note 7) Using H-PCF and TODX2960A(F) 30 dBm DC to 6 Mb/s High Level Input Voltage V 3.5 V IH Low Level Input Voltage V 1.5 V IL High Level Input Current I V = 5.25V, V = 2.7V 20 A IH CC I Low Level Input Current I V = 5.25V, V = 0.4V 0.4 mA IL CC I High Level Output Voltage V V = 4.75V 4.1 4.5 V OH CC Low Level Output Voltage V V = 4.75V 0.1 0.4 V OL CC Note 2: LED is on when input signal is high level, it is off when low level. High level output when optical flux is received. Low level output when it is not received. The duty factor must be kept 25 to 75%. Note 3: H-PCF (200 m core / 230 m cladding) .F07 type optical connector with polished surface. Note 4: H-PCF (200 m core / 230 m cladding). F07 type optical connector with non-polished surface (cut by fiber cutter). Note 5: Between input of TODX2960A(F) and output of TODX2960A(F). Note 6: Measure with a standard optical fiber with fiber optic connectors. Valued by peak. 9 Note 7: BER 10 , Valued by peak. 2 2016-04-15