DC/DC Converters TEL 5 Series, 5 Watt Features Wide 2:1 input range Cost efcfi ient SMD-design High power density High efcfi iency up to 86% Regulated outputs I/O isolation 1500 VDC Input filter to meet EN 55022, Class A and FCC, level A without external components Indenfi ite short-circuit protection 24-pin DIP with industry standard pinout High reliability, MTBF >1 Mio. h Lead free design, RoHS compliant 3-year product warranty The TEL 5 Series is a range of DC/DC-converter modules with wide input range of 2:1. State of the art SMD-technology guarantees a product with very high reli- ability and excellent cost /performance ratio. High efcfi iency allows an operating temperature range of 40C to +85C at full load. This product series provides an economical solution for many cost critical applications in industrial and consumer electronics. Models Ordercode Input voltage range Output voltage Output current max. Efficiency typ. TEL 5-1210 3.3 VDC 1200 mA 77 % TEL 5-1211 5 VDC 1000 mA 81 % 9 18 VDC TEL 5-1212 12 VDC 500 mA 84 % (nominal 12 VDC) TEL 5-1222 12 VDC 250 mA 84 % TEL 5-1223 15 VDC 200 mA 84 % TEL 5-2410 3.3 VDC 1200 mA 79 % TEL 5-2411 5 VDC 1000 mA 83 % 18 36 VDC TEL 5-2412 12 VDC 500 mA 86 % (nominal 24 VDC) TEL 5-2422 12 VDC 250 mA 86 % TEL 5-2423 15 VDC 200 mA 86 % DC/DC Converters TEL 5 Series 5 Watt Input Specifications Input current no load /full load 12 Vin models: 20 mA / 590 mA typ. 24 Vin models: 5 mA / 290 mA typ. Start-up voltage / 12 Vin models: 8.0 VDC / 8.0 VDC under voltage shut down 24 Vin models: 16.0 VDC / 16.0 VDC Surge voltage (1 sec. max.) 12 Vin models: 25 V max. 24 Vin models: 50 V max. Conducted noise (input) EN 55022 class A, FCC part 15 level A Output Specifications Voltage set accuracy 1 % Regulation Input variation Vin min. to Vin max. 0.3 % max. Load variation 20 100 % single output models 1 % max dual output models balanced load 2 % max. Minimum load 5 % of rated max current (operating at lower load condition is safe but the modules may not meet all spscifications listed) Ripple and noise (20 MHz Bandwidth) 75 mVpk-pk max. Temperature coefficient 0.02 %/K Output current limitation >120 % of Iout max., constant current Short circuit protection continuous (automatic recovery) Capacitive load single output models: 6800 F max. dual output models: 1000 F max. (each output) General Specifications Temperature ranges Operating 40C to +85C Case temperature +90C Storage 40C to +125C Derating (convection cooling) 3.3 %/K above 70C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F at +25C, ground benign) >1 Mio. h Isolation voltage (60 sec.) Input/Output 1500 VDC Isolation capacitance Input/Output 380 pF typ. Isolation resistance Input/Output (500 VDC) >1000 M Ohm Switching frequency 300 kHz typ. Safety Standards IT / Multimedia Designed for EN 62368-1 (no certification) Environmental compliance Reach www.tracopower.com/info/reach-declaration.pdf RoHs RoHS directive 2011/65/EU All specicfi ations valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated.