DC/DC Converters TEN 10 Series, 10 Watt UL 60950-1 Features Wide 2:1 input range High power density Operating temperature range 40C to +85C Indenfi ite short circuit protection I/O isolation 1500 VDC Input filter to meet EN 55022, Class A and FCC, level A without external components Industry standard pinout Shielded metal case with insulated The TEN 10 series is a family of high performance 10W DC/DC converters in a baseplate compact 2 x 1 low prole pfi ackage with industry standard footprint. A high efcfi i - High reliability, MTBF >1 Mio. h ency allows a wide operating temperature range of 40C to +85C. A built-in EMI lfi ter is built in to meet EN 55022, class A without any external components. 3-year product warranty Further standard features include over voltage protection and short-circuit protec- tion. Typical applications for these converters are battery operated equipment, in- strumentation, distributed power architectures in communication and industrial elec- tronics, everywhere where isolated, tightly regulated voltages are required. Models Order code Input voltage range Output voltage Output current max. Efficiency typ. TEN 10-1210 3.3 VDC 2400 mA 72 % TEN 10-1211 5 VDC 2000 mA 77 % TEN 10-1212 12 VDC 830 mA 80 % TEN 10-1213 9 18 VDC 15 VDC 670 mA 80 % TEN 10-1215 (12 VDC nominal) 24 VDC 415 mA 81 % TEN 10-1221 5 VDC 1000 mA 78 % TEN 10-1222 12 VDC 415 mA 81 % TEN 10-1223 15 VDC 330 mA 80 % TEN 10-2410 3.3 VDC 2400 mA 76 % TEN 10-2411 5 VDC 2000 mA 78 % TEN 10-2412 12 VDC 830 mA 82 % TEN 10-2413 18 36 VDC 15 VDC 670 mA 82 % TEN 10-2415 (24 VDC nominal) 24 VDC 415 mA 83 % TEN 10-2421 5 VDC 1000 mA 80 % TEN 10-2422 12 VDC 415 mA 82 % TEN 10-2423 15 VDC 330 mA 82 % TEN 10-4810 3.3 VDC 2400 mA 76 % TEN 10-4811 5 VDC 2000 mA 80 % TEN 10-4812 12 VDC 830 mA 82 % TEN 10-4813 36 75 VDC 15 VDC 670 mA 83 % (48 VDC nomial) TEN 10-4815 24 VDC 415 mA 83 % TEN 10-4821 5 VDC 1000 mA 81 % TEN 10-4822 12 VDC 415 mA 83 % TEN 10-4823 15 VDC 330 mA 83 % DC/DC Converters TEN 10 Series 10 Watt Input Specifications Input current at no load 12 Vin models: 30 mA typ. 24 Vin models: 20 mA typ. 48 Vin models: 10 mA typ. Input current at full load 12 Vin 3.3 VDC models: 915 mA typ. 12 Vin 5 & 5 VDC models: 1080 mA typ. 12 Vin other output models: 1045 mA typ. 24 Vin 3.3 VDC models: 435 mA typ. 24 Vin 5 & 5 VDC models: 530 mA typ. 24 Vin other output models: 510 mA typ. 48 Vin 3.3 VDC models: 215 mA typ. 48 Vin 5 & 5 VDC models: 260 mA typ. 48 Vin other output models: 250 mA typ. Start-up voltage / 12 Vin models: 8.5 VDC / 8 VDC under voltage shut down 24 Vin models: 16.5 VDC / 16 VDC 48 Vin models: 32.5 VDC / 32 VDC Surge voltage 12 Vin models: 25 V max. (1 sec. max.) 24 Vin models: 50 V max. 48 Vin models: 100 V max. Reserve voltage protection 1.0 A max. Conducted noise (input) EN 55022 level A, FCC part 15, level A Output Specifications Voltage set accuracy 1 % Regulation Input variation Vin min. to Vin max. 0.3 % max. Load variation 10 % 90 % single output models: 0.5 % max. dual output models: 1 % max. (balanced load) dual output models: 3 % max. (unbalanced load) Ripple and noise (20 MHz Bandwidth) single output models: 50 mVpk-pk max. dual output models: 75 mVpk-pk max. Temperature coefficient 0.02 %/K Output current limitation >110 % of lout max., constant current Short circuit protection continuous (automatic recovery) Capacitive load single output models: 2200 F max. dual output models: 470 F max. General Specifications Temperature ranges Operating 40C to +85C Case temperature +100C max. Storage 40C to +125C Derating (convection cooling) 3.3 %/K above 70C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25C, ground benign) >1 Mio h Isolation Test Voltage (Input/Output, 60s) 1500 VDC Insulation System Functional Isolation Capacitance (Input/Output) 150 pF typ. Isolation Resistance (Input/Output) >1 G Ohm Switching Frequency single output models: 500 kHz typ. (pulse width modulation) dual output models: 300 kHz typ. (pulse width modulation) All specicfi ations valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated.