TES 3-4823

DC/DC Converters TES 3 Series, 3 Watt CB Scheme UL 60950-1 Features SMD package Wide 2:1 input voltage range I/O isolation 1500VDC Under voltage lockout Operating temp. range 40C to +85C Short circuit protection High accuracy of pin co-planarity Lead free design RoHS compliant 3-years product warranty The TES-3 series is a family of high performance 3W dc-dc converter modules featuring wide 2:1 input voltage ranges. The 15 models come in a low prole fi SMD package with dimensions of 32.3 x 14.8 x 10.2 mm. A high efcfi iency allows an operating temperature range of 40C to +85C at full load. This product is qualiefi d for soldering in a high temperature lead-free reflow solder process. Typical applications for the converters are battery operated equipment, instrumentation, communication and industrial electronics, everywhere where an isolated, tightly regulated voltage is required. Models Ordercode Input voltage range Output voltage Output current max. Efficiency typ. TES 3-1210 3.3 VDC 700 mA 75 % TES 3-1211 5 VDC 600 mA 79 % 9 18 VDC TES 3-1212 12 VDC 250 mA 82 % (12 VDC nominal) TES 3-1222 12 VDC 125 mA 81 % TES 3-1223 15 VDC 100 mA 81 % TES 3-2410 3.3 VDC 700 mA 76 % TES 3-2411 5 VDC 600 mA 80 % 18 36 VDC TES 3-2412 12 VDC 250 mA 83 % (24 VDC nominal) TES 3-2422 12 VDC 125 mA 82 % TES 3-2423 15 VDC 100 mA 82 % TES 3-4810 3.3 VDC 700 mA 76 % TES 3-4811 5 VDC 600 mA 80 % 36 75 VDC TES 3-4812 12 VDC 250 mA 83 % (48 VDC nominal) TES 3-4822 12 VDC 125 mA 82 % TES 3-4823 15 VDC 100 mA 82 % DC/DC Converters TES 3 Series 3 Watt Input Specifications Input current no load / full load 12 Vin models: 20 mA / 300 mA typ. 24 Vin models: 5 mA / 150 mA typ. 48 Vin models: 3 mA / 75 mA typ. Start-up voltage / 12 Vin models: 6 VDC / 8 VDC typ. under voltage shut down 24 Vin models: 12 VDC / 16 VDC typ. 48 Vin models: 24 VDC / 32 VDC typ Surge voltage (1 sec. max.) 12 Vin models: 25 V max. 24 Vin models: 50 V max. 48 Vin models: 100 V max. Reflected input ripple current can be reduced by ext. 12.2 F polyester film capacitor Input filter Pi filter Output Specifications Voltage set accuracy 1 % Regulation Input variation Vin min. to Vin max. 0.3 % max. Load variation 10 100 % single output models: 1.0 % max. dual output models balanced load: 1.0 % max. dual output models unbalanced load: 2.0 % max. Ripple and noise 50 mVpk-pk max. Temperature coefficient 0.02 %/C Current limitation >110 % of Iout max., continuouse Short circuit protection hiccup mode, indefinite (no automatic recovery) Capacitive load single output models 4700 F dual output models 180 F (each input) General Specifications Temperature ranges Operating 40C to +85C Case temperature +100C max. Storage 40C to +125C Derating (convection cooling) 3.5 %/K above 70C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25C, ground benign) >1000000 h Isolation voltage (60 sec.) Input/Output 1500 VDC Isolation capacitance Input/Output 65 pF typ. Isolation resistance Input/Output >1000 Mohm Switching frequency 300 kHz typ. (frequency modulation PFM) Safety standards UL 60950-1, IEC/EN 60950-1 Supporting documents: www.tracopower.com/overview/tes3 All specicfi ations valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated.