TES 5-2412WI TRACO Power

DC/DC Converters TES 5WI Series, 5 Watt Features Compact SMD package 33.4 x 25.6 mm footprint Ultra-wide 4:1 input voltage range I/O isolation 1500 VDC Operating temp. range 40C to +71C Short circuit protection Input filter to meet EN 55022, class A Remote On/Off High accuracy of pin co-planarity 3-year product warranty The TES-5WI series is a family of high performance 5W dc/dc-converter modules in a low prole fi SMD package with compact dimensions. The 14 modules feature ultra- wide 4:1 input ranges with tightly regulated output voltage. High efcfi iency allows an operating temperature range of 40 to +71C at full load. Further features are built-in EMI-lfi ter to meet EN 55022 class A without external components and remote On/Off control. The products comply with IPC J-STD-020D and are qualiefi d for high temperature lead-free reflow solder process. Models Order code Input voltage Output voltage Output current max. Efficiency typ. TES 5-2410WI 3.3 VDC 1200 mA 76 % TES 5-2411WI 5 VDC 1000 mA 80 % TES 5-2412WI 12 VDC 420 mA 83 % 9 36 VDC TES 5-2413WI 15 VDC 335 mA 83 % (24 VDC nominal) 5 VDC 500 mA 80 % TES 5-2421WI TES 5-2422WI 12 VDC 210 mA 83 % TES 5-2423WI 15 VDC 165 mA 83 % TES 5-4810WI 3.3 VDC 1200 mA 76 % TES 5-4811WI 5 VDC 1000 mA 80 % TES 5-4812WI 12 VDC 420 mA 83 % 18 75 VDC TES 5-4813WI 15 VDC 335 mA 83 % (48 VDC nominal) TES 5-4821WI 5 VDC 500 mA 80 % TES 5-4822WI 12 VDC 210 mA 83 % TES 5-4823WI 15 VDC 165 mA 83 % DC/DC Converters TES 5WI Series 5 Watt Input Specifications Input current (full load) 24 V models: 250 mA typ. 48 V models: 125 mA typ. Input current (no load) 24 V models: 20 mA typ. 48 V models: 10 mA typ. Start-up voltage / under voltage shut down 24 V models: 9 VDC / 8 VDC typ. 48 V models: 18 VDC / 16 VDC typ Surge voltage (1 sec. max.) 24 V models: 50 V max. 48 V models: 100 V max. Reflected input ripple current 24 V models: 10 mA typ. 48 V models: 5 mA typ. Input filter EN 55022 class A, FCC part 15, level A Output Specifications Voltage set accuracy 2 % Regulation Input variation Vin min. to Vin max. 1.0 % max. Load variation 10 100 % single output models: 1.0 % max. dual output models balanced load: 3.0 % max. Minimum load 10 % of rated max current (operation at lower load condition is safe but a higher output ripple will be experienced) Temperature coefficient 0.02 %/C max. Ripple and noise 85 mVpk-pk max. Dynamic load response (25% load change) 6 % max. peak variation 500 S max. response time Transient response (25% load step change) 200 s typ. Current limitation >115 % of Iout max. Short circuit protection indefinite, automatic recovery Capacitive load 3.3 & 5 VDC models: 2000 F 12 VDC models: 470 F 15 VDC models: 330 F 5 VDC models: 680 F 12 VDC models: 330 F 15 VDC models: 220 F Remote On/Off On: 2.5 to 5.5 V or open circuit Off: 0.7 to 0.8 V or short circuit pin 3 and pin 1/2 Off idle current: 10 mA General Specifications Temperature ranges Operating 40C to +71C Case temperature +100C max. Storage 40C to +125C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25C, ground benign) >1000000 h Isolation voltage (60 sec.) Input/Output 1500 VDC Isolation capacitance Input/Output 750 pF max. Isolation resistance Input/Output >1000 Mohm Switching frequency 340 kHz typ. (frequency modulation PFM) Safety standards Designed for IEC/EN/UL 60950-1 (no certification) All specicfi ations valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated.