TMV 1215D TRACO Power

DC/DC Converters TMV Series, 1 Watt Features Single-in-line (SIL) package Isolated single and dual output models I/O isolation 3000 VDC Unregulated device High Efcfi iency up to 81% Extended temperature range 40C to +85C Pin-compatible with other manufacturers 100% Burn-in (8 h) Lead free design, RoHS compliant 3-year product warranty The TMV series are miniature, isolated 1 W DC/DC-converters with high isolation 2 in a Single-in-Line package (SIP). Requiring only 1.2 cm board space they offer the ideal solution in many space critical applications for board level power distribution. The use of SMD-technology makes it possible to offer a product with high perfor- mance at low cost. Models Ordercode Input voltage Output voltage Output current max. Efficiency typ. TMV 0505S 5 VDC 200 mA 71 % TMV 0509S 9 VDC 110 mA 76 % TMV 0512S 12 VDC 84 mA 78 % TMV 0515S 5 VDC 10% 15 VDC 67 mA 78 % TMV 0505D 5 VDC 100 mA 72 % TMV 0512D 12 VDC 42 mA 78 % TMV 0515D 15 VDC 34 mA 79 % TMV 1205S 5 VDC 200 mA 73 % TMV 1212S 12 VDC 84 mA 80 % TMV 1215S 15 VDC 67 mA 80 % 12 VDC 10% TMV 1205D 5 VDC 100 mA 74 % TMV 1212D 12 VDC 42 mA 81 % TMV 1215D 15 VDC 34 mA 81 % TMV 2405S 5 VDC 200 mA 71 % TMV 2412S 12 VDC 84 mA 78 % TMV 2415S 15 VDC 67 mA 79 % 24 VDC 10% TMV 2405D 5 VDC 100 mA 72 % TMV 2412D 12 VDC 42 mA 79 % 15 VDC 34 mA 80 % TMV 2415D DC/DC Converters TMV Series 1 Watt Input Specifications Input current no load /full load 5 Vin models 30 mA / 270 mA typ. 12 Vin models 12 mA / 110 mA typ. 24 Vin models 7 mA / 55 mA typ. Surge voltage (1 s max.) 5 Vin models 9 V max. 12 Vin models 18 V max. 24 Vin models 30 V max. Reflected input ripple current can be reduced by ext. 13.3 F polyester film capacitor Input filter internal capacitor Output Specifications Voltage set accuracy 1 % typ. / 3 % max. Voltage balance (dual output models, balanced loads) 0.1 % typ. / 1 % max. Regulation Input variation (1 % change of Vin) 1.2 % typ. / 1.5 % max. Load variation (20 100 %) 5 to 10 % max. Ripple and noise (20 MHz Bandwidth) 65 mVp-p typ. / 100 mVp-p max. Temperature coefficient 0.01 %/K typ. / 0.02 %/K max. Short circuit protection limited 0.5 s max. Capacitive load single output models: 220 F max. dual output models: 100 F max. (each output) General Specifications Temperature Ranges Operating 3.3, 5 & 5 Vout models: 40C to +85C all other output models: 40C to +90C Case temperature +95C max. Storage 50C to +125C Derating 3.3, 5 & 5 Vout models: 4 %/K above 75 C all other output models: 4 %/K above 80 C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F at +25C, ground benign) >2000000 h Isolation Test Voltage (Input/Output, 60 s) 3000 VDC Insulation System Functional Isolation Capacitance (Input/Output) 60 pF typ. / 100 pF max. Isolation Resistance (Input/Output) >10 GOhm Switching Frequency 70 to 120 kHz (Frequency modulation) Environmental Compliance Reach www.tracopower.com/info/reach-declaration.pdf RoHS RoHS directive 2011/65/EU All specicfi ations valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated.