DC/DC Converters TSR 0.5 Series, 0.5 A Switching Regulator Features Compact SIP package Very high efcfi iency up to 97% Excellent line / load regulation Low standby current Operating temperature range 40 to 90C Over-temperature protection Short circuit protection 3-year product warranty TSR-0.5 is a series of step-down nonisolated switching regulators in compact SIP package. These converters are an ideal drop-in replacement to LM78 linear regu- lators when energy efcfi iency is a parameter of the design. The high efcfi iency up to 97 % allows full load operation up to +80C (+90C with 50% load) ambient temperature without the need of forced aircooling. Excellent output voltage accuracy and low standby current are other features that- distinguish switching regulators from linear regulators. Models 1) Order code Input voltage range Output voltage Output current Efficiency typ. max. Vin min. Vin 32VDC TSR 0.5-2415 1.5 VDC 73 % 63 % TSR 0.5-2418 1.8 VDC 82 % 71 % 4.75 32 VDC TSR 0.5-2425 2.5 VDC 87 % 77 % 3.3 VDC 91 % 81 % TSR 0.5-2433 0.5 A TSR 0.5-2450 6.5 32 VDC 5.0 VDC 94 % 86 % TSR 0.5-2465 8 32 VDC 6.5 VDC 95 % 88 % TSR 0.5-2490 11 32 VDC 9.0 VDC 96 % 92 % TSR 0.5-24120 15 32 VDC 12 VDC 97 % 94 % TSR 0.5-24150 18 32 VDC 15 VDC 97 % 95 % 1) For input voltage higher 24 VDC an input capacitor 22 F/ 50 V is required DC/DC Converters TSR 0.5 Series 0.5 A Input Specifications No load input current (at 24Vin) 5 mA typ. Short circuit input power 1.5 W max. Surge voltage 0.3 / 34 VDC max. Input filter internal capacitor, see filter suggestion page 3 for to meet EN55022 class A, class B ESD (electrostatic discharge) EN 61000-4-2, air 8 kV, perf. criteria A Radiated immunity EN 61000-4-3 3 V/m, perf. criteria A Fast transient EN 61000-4-4, 0.5 kV, perf. criteria A with external input capacitor e.g. Nippon chemi-con KY 330 F, 100 V Conducted immunity EN 61000-4-6, 3 Vrms, perf. criteria A Magnetic field immunity EN 61000-4-8, 3 A/m, perf. criteria A Output Specifications Voltage set accuracy 3 % (at full load) Regulation Input variation 1.5 to 6.5 Vin models: 0.4 % other models: 0.2 % Load variation (10 100 %) 1.5 to 6.5 Vin models: 0.6 % other models: 0.4 % Minimum load not required Ripple and noise 1.5 to 6.5 Vin models: 30 mVp-p max. other models: 40 mVp-p max. Temperature coefficient 0.015 %/K max. Dynamic load Peak variation 2 % max. (50% load step change) Response time 100 S max. Short circuit protection continuous, automatic recovery Current limitation 1.0 A max. Capacitive load 220 F max. General Specifications Temperature ranges Operating 40C to +90C Case temperature +100C. max. Storage 55C to +125C Derating positive output circuit 5 %/K above +80C Overtemperature protection at +160C (on internal IC) Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25C, ground benign) >2000000 h Isolation voltage none Switching frequency 330 kHz 50 kHz (pulse width modulation) Environmental compliance Reach www.tracopower.com/info/reach-declaration.pdf RoHS RoHS directive 2011/65/EU Physical Specifications Casing material non-conductive plastic (UL94V-0 rated) Pin material alloy 42 Weight 1.95 g (0.69 oz) Lead temperature 260C Washing baking after washing: 100C for 30 min. All specicfi ations valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated.